Introducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2009-2020 RSV4 & 2011-2020 Tuono V4.Anyone who rides or repairs Aprilia’s motorcycles is probably familiar with the stator, flywheel, and sometimes voltage regulator issues common to these models. Most of these bikes will have had at least one stator fail in their lifetime so far. The main problem was extremely strong magnets were used on the original flywheels, creating a very high power stator output, which generated excessive heat. This usually resulted in burned-up, or shorted stator winding, and often in a failed voltage regulator.The solution was a new flywheel from Kokusan with lower strength magnets, dropping the stator output and heat generation. This results in a charging system output perfectly matched for the bike’s electronic needs and long-term reliability of the stator and voltage regulator.To prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a complete reliable heavy-duty charging system replacement kit for your Aprilia. Upgrade today if you haven’t already!Included in this kit Heavy-duty Kokusan brand recall-type OEM flywheel Triple-tested heavy-duty stator Stator crankcase cover gasket Flywheel puller With this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologiesFeatures:Kokusan upgrade/recall type flywheelLower-strength magnets for correct stator output, low heat generation, and long-term reliability.Built to OEM sizeFits precisely in your ride: install it and forget it.Improved epoxyUses high-temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachmentHigh-grade steel cappingPrevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.Precise balancingEliminates crankshaft vibrations for longer engine longevity.Shop with confidenceAll products are tested.Don't waste time with temporary solutions, and start fixing your ride like a pro!Stator DimensionsInterior diameter: 43 mmExterior diameter: 105 mmThickness: 13.8 mmLength of wires stator to grommet: 125 mmLength of wires grommet to plug: 320 mmOther specifications :Number of wires: 3Number of plugs: 1Number of pins: 3Wire to wire resistance:Alternator: Between each Yellow = 0.3 ohms +-20%Flywheel DimensionsExterior Diameter: 121 mmInterior Diameter: 107 mmInterior Diameter Center Housing: 19 mmExterior Diameter Center Housing: 34 mmThickness (exterior): 35.3 mmThickness (interior): 31.65 mmFlywheel Puller Specifications36 mm x 1.5 right-hand maleLength: 60 mmExterior Diameter: 48 mmInterior Diameter: 35 mmExterior Diameter Center Housing: 37 mm
Related
Related
Related
Related