The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno combination with various headers and connections, eliminating the need to stack multiple shields. By using the RedBot accessory boards and your own chassis, you can design a robot to suit your needs. The RedBot comes pre-programmed with the Optiboot (Uno) bootloader. By simply connecting a USB mini-B cable, you can program it in the Arduino IDE using our example code, or your own. The optional add-on sensors attach to the main board via 6-pin headers or jumper cables to increase capabilities. Check out the entire RedBot family of products! **Features:** * 5V Logic * 6-9V Input Voltage via Barrel Jack or 2-Pin Header * ATmega328P (pre-programmed) * TB6612FNG Dual DC Motor Driver * USB Programmable via FTDI * XBee Port with HW/SW Serial Switch * 2x 3-Pin Female Motor Port * 2x 6-Pin Male Optional Servo Header * 4x 6-Pin Male Optional Sensor Header **Documents:** * [Schematic](https://cdn.sparkfun.com/datasheets/Robotics/RedBot-v14.pdf) * [Eagle Files](https://cdn.sparkfun.com/datasheets/Robotics/RedBot-v14.zip) * [RedBot Experiment Guide](https://learn.sparkfun.com/tutorials/experiment-guide-for-redbot-with-shadow-chassis) * [RedBot Shadow Chassis Assembly Guide](https://learn.sparkfun.com/tutorials/assembly-guide-for-redbot-with-shadow-chassis) * [Datasheet](https://cdn.sparkfun.com/datasheets/Robotics/doc8161.pdf) (ATmega328P) * [Datasheet](https://cdn.sparkfun.com/datasheets/Robotics/TB6612FNG.pdf) (TB6612FNG) * [Datasheet](https://cdn.sparkfun.com/datasheets/Robotics/DS_FT232R.pdf) (FT232R) * [GitHub](https://github.com/sparkfun/RedBot) (Design Files & Example Code) * [GitHub](https://github.com/sparkfun/SparkFun_RedBot_Arduino_Library) (Library) **Videos**
