Rode NT2-A Large-Diaphragm Multipattern Condenser Microphone The NT2-A is a highly versatile large-diaphragm studio condenser microphone designed to offer pristine audio quality and flexibility in equal measure. Featuring a three-position pad (0dB, -5dB, -10dB), high-pass filter (flat, 40Hz, 80Hz), and polar pattern control (cardioid, omnidirectional, figure-8), it can easily adapt to any recording situation in the studio. The NT2-A features a dual 1-inch gold-sputtered cardioid condenser capsule with internal shock mounting and offers ultra-low self-noise and full frequency response, evoking the silky smooth character of the legendary microphones of the '50s and '60s. Key Features: Multi-pattern large-diaphragm studio condenser microphone Three-position pad, high-pass filter, and polar pattern controls Ultra-low self-noise and full-frequency response Internal capsule shock mounting Large-Diaphragm True Condenser This true condenser (externally biased) features a 1" gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal. Three Polar Patterns With three polar patterns selectable on the mic, the NT2-A offers excellent versatility for single-source close miking (cardioid recommended), dual-source pickup (figure-8 recommended), and room ambiance capture (omnidirectional recommended). Special Voicing The frequency and transient response of this transducer have been voiced to complement today's recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the '50s and '60s. Transformerless Output The transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain. 48V Phantom Power The NT2-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces. Specifications Microphone Primary Applications Studio Recording Form Factor Large Diaphragm Mic / Stand/Boom Mount Intended Sound Sources Vocals, Speech/Voice Over, Instrument Sound Field Mono Operating Principle Pressure Gradient Capsule Condenser Diaphragm 1" / 25.40 mm Polar Pattern Cardioid, Figure-8, Omnidirectional Pattern Selection Switched (Adjustable on Mic) Orientation Side Address Circuitry Solid-State (JFET) Pad -5 dB-10 dB High-Pass Filter 40 Hz80 Hz Tone Adjustment None Gain Adjustment None Indicators None On-Board Controls High-Pass Filter, Pad, Polar Pattern Windscreen None Performance Frequency Range 20 Hz to 20 kHz Maximum SPL 147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)157 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad) Impedance 200 Ohms Sensitivity -36 dBV/Pa at 1 kHz Output Level 16 mV (Max, 1 kHz) Dynamic Range 140 dB Signal-to-Noise Ratio 87 dB A-Weighted Equivalent Noise Level 7 dB SPL A-Weighted Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic) Headphone Connector None Cable Length 20' / 6.1 m Power Bus Power None Operating Voltage 24 V (Phantom Power)48 V (Phantom Power) Physical Color Silver Mounting Shockmount (Included) Included Case Mic Sock Included Filters Pop Filter Dimensions ø: 2.2 x L: 8.2" / ø: 55 x L: 209 mm Weight 1.9 lb / 0.86 kg Packaging Info Package Weight 5.445 lb Box Dimensions (LxWxH) 15.4 x 10.7 x 5.1"
Related
Related
Related
Related