Roll-Line Mounting Hardware - Secure Your Skates Introducing the Roll-Line Mounting Hardware Fixing Kit, providing all the essential components needed to properly mount your Roll-Line plates to most skate boots. This comprehensive roller skate accessory ensures a secure and reliable fit, making it a must-have for every skater. Upgrade your setup with the best skate accessories from Roll-Line. Roll-Line Mounting Hardware - Secure Your Skates Introducing the Roll-Line Mounting Hardware Fixing Kit, providing all the essential components needed to properly mount your Roll-Line plates to most skate boots. This comprehensive roller skate accessory ensures a secure and reliable fit, making it a must-have for every skater. Upgrade your setup with the best skate accessories from Roll-Line.FeaturesFeaturesThe Roll-Line Mounting Hardware Kit is the little bag with the Hardware to properly mount your Roll-Line Skates to most any Skating Boot. The Roll-Line Kit Includes:1- Four (4) Long Mounting Bolts for the Heels2- Eight (8) Short Mounting Bolts for the Ball of the Boots3- Twelve (12) Flat Washers4- Twelve (12) Nuts that utilize a 7mm Wrench (This same kit can be used to mount ATLAS, Snyder, or most other Frames (including Inline Frames) to most Skating Boots.) The Mounting Hardware Kit (Fixing Kit)should be used with an 11/64" Drill Bit and a Countersink when drilling your Skating Boots. On Today's Skating Boots, it is strongly recommended to NOT use the Snyder Boot marking tool, as this will in most cases move the Toe of the Frame too far to the outside of the boot. It is strongly recommended to use all Four (4) of the Mounting Hardware Kit (Fixing Kit) Short Bolts, Washers, and Nuts and the EDEA Power Wedges in the Ball area of both Skating Boots. Be sure to tighten all of the Mounting Nuts and even consider using a touch of Blue, Removable Lock Tite.
