The Rosner is a 1,500 mm floor lamp in sand-finished iron with an adjustable head and gold detailing — in black or white, taking one GU10 lamp. It plugs in. The old page said “Lead and Plug: Yes” and, further down, “must be installed by a licensed electrician”. Both cannot be true. It is Class II, double insulated, with a 2,000 mm cable and a plug — no electrician. The head adjusts, and the gold is where you see it Two details working together. The head tilts, so one lamp reads a book, washes a wall or lifts a corner. And the gold detailing sits on the head itself — the part at eye level when you are seated, and the part that catches its own light. On a plain sand-finished body, that single warm accent is what stops it reading as a utility lamp. GU10, which suits a lamp you aim A GU10 is a reflector lamp with its own beam — so you choose the beam angle: narrow for reading, wide for a wall wash. That choice is yours and you can change it later. Up to 6 W, not supplied. A 250 mm base under a 150 mm shade The proportions are deliberate: a ø250 mm base under a small ø150 mm head, at 3.05 kg. Wide and heavy at the bottom, light at the top — which a 1.5-metre lamp with a head you push and pull genuinely needs. Sand finish, in black or white A fine texture rather than a gloss, so it does not show fingerprints or reflect lamplight. Black is graphic against a pale wall; white nearly disappears. There is a matching table lamp Rosner runs as floor and table lamps, both with the adjustable head and the gold detail. A floor lamp beside a chair with the table lamp on the side table reads as one considered pairing. Where it works Beside a reading chair — head aimed down. Living room corners, aimed at the wall. Studies and home offices. Rooms where the seating moves. Specifying it 1,500 mm tall, 240 mm wide, base ø250 mm, head ø150 × 150 mm, cable 2,000 mm with a plug, 3.05 kg, in iron, sand finish. One GU10 lamp to 6 W, not supplied, in an adjustable head; dimming is globe dependent. 240 V, Class II — double insulated, no earth required, IP20 — indoor and dry locations only. Warranty is three years, as a replacement warranty. Supplied and supported by Lights For You. Questions Do I need an electrician?No — it plugs in. The old page said "Lead and Plug: Yes" and, further down, that an electrician was required. It is double insulated with a 2,000 mm cable and a plug. Does the head move?Yes, it tilts — so one lamp reads a book, washes a wall or lifts a corner. Where is the gold detailing?On the head itself — at eye level when you are seated, and the part that catches its own light. On a plain sand-finished body that single warm accent is what stops it reading as a utility lamp. What lamp does it take?One GU10 up to 6 W, not supplied. A GU10 is a reflector lamp with its own beam, so you choose the angle — narrow for reading, wide for a wall wash. Is it stable?Yes — a ø250 mm base at 3.05 kg under a small ø150 mm head. Wide and heavy at the bottom, which a lamp with a head you push and pull needs. Is there a matching table lamp?Yes, with the same adjustable head and gold detail. Black or white?Both in a fine sand texture that does not show fingerprints. Black is graphic against a pale wall; white nearly disappears.
