Specifications: Image Sensor 1/3" SONY Super HAD II CCD Horizontal Resolution 600TVL Lens 2.1mm (M8) FOV160° IR Blocked Signal System PAL / NTSC Integrated OSD Yes One Touch Scene Setting(AGC) Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight S/N Ratio >60dB (AGC OFF) Electronic Shutter Speed PAL: 1/50~100,000; NTSC: 1/60~100,000 Auto Gain Control (AGC) Yes Min. Illumination [email protected] WDR D-WDR DNR 2DNR Day/Night Color/Auto/B&W Power DC 5-36V Working Current 12V@60mA / 5V@130mA Net weight 5.6g Dimensions 19mm*19mm*19mm Package 1x Camera 1x Bracket 1x 6pin connector silicon wire 1x OSD board TR Tip : A low ESR capacitor of sufficient rating (eg 1000uf/35Volts for 4S power), across the FC battery pads is helpful against electrical noise that may compromise FPV feed. If your VTx has an integrated BEC with a stable voltage output of sufficient current capacity consider powering your FPV camera with it, in most cases it will improve the quality of your FPV feed A LC filter of sufficient current capacity (1 amp is more than sufficient), connected between the camera power source and camera input, is a worthwhile addition for improving feed. If space is a constraint, use a super micro LC filter, usually weighting less than 0.5grams, and hot glue it to the back of the camera.
