Specifications: Image Sensor 1/3" SONY Super HAD II CCD Horizontal Resolution 600TVL Lens 2.1mm IR Blocked Signal System PAL Integrated OSD YES Integrated MIC YES S/N Ratio >60dB(AGC OFF) Electronic Shutter Speed PAL:1/50~100,000; NTSC:1/60~100,000 AutoGain Control(AGC) YES Back light compensation(BLC) YES Min.illumination 0.01Lux/1.2F WDR D-WDR DNR 2DNR Day/Night Color / Auto / B&W Power DC 5 to 36V Working Current 5V@130mA / 12V@70mA Net weight 14g Dimensions 28.5mm * 26mm * 26mm Package 1x Camera 1x Aluminium bracket 1x Set of screws 1x 6pin FPV silicone cable 1x OSD Key-press Board TR Tip : A low ESR capacitor of sufficient rating (eg 1000uf/35Volts for 4S power), across the FC battery pads is helpful against electrical noise that may compromise FPV feed. If your VTx has an integrated BEC with a stable voltage output of sufficient current capacity consider powering your FPV camera with it, in most cases it will improve the quality of your FPV feed A LC filter of sufficient current capacity (1 amp is more than sufficient), connected between the camera power source and camera input, is a worthwhile addition for improving feed. If space is a constraint, use a super micro LC filter, usually weighting less than 0.5grams, and hot glue it to the back of the camera.
