Rustic Terracotta Timber Wall Bring the warmth of aged wood and sunbaked clay into your space with this removable wallpaper. Rustic Terracotta Timber Wall blends earthy terracotta tones with timber-inspired texture for an inviting, handcrafted look—perfect for living rooms, bedrooms, entryways, and cozy nooks. Key Features Removable and repositionable: Designed for stress-free updates without damaging most properly primed, smooth walls. Eco-conscious materials: PVC-free substrate printed with eco-friendly, water-based inks. Matte, low-glare finish: Enhances the natural, rustic wood-and-clay effect. Easy to plan: Rolls are 24 in wide; choose your panel height up to 120 in to match your wall. Seam-friendly print: Printed in panels for clean alignment across seams. Ideal surfaces: Smooth, clean, dry, and properly primed walls free of texture and contaminants. Size and Coverage Each roll is 24 in wide and available in heights up to 120 in. To estimate coverage, multiply your wall width by height and divide by the square footage of your chosen roll height. Example: a 24 in x 120 in roll covers approximately 20 sq ft. Measure the full width of your wall and order enough 24 in panels to span the width, adding 1–2 extra panels for pattern matching and trimming if needed. Order panel height equal to (or slightly taller than) your wall height for a clean top and bottom trim. Installation Guidance Prep the wall: Ensure the surface is smooth, clean, dry, and fully cured (fresh paint typically needs 30 days). Remove dust and glossy residues. Plan your layout: Mark a plumb line for the first panel using a level. Start at the top: Peel back 6–12 in of the backing and align the panel with your plumb line. Apply gradually: Smooth downward with a squeegee or soft cloth, working from center outward to remove air bubbles. Match seams: Butt edges gently—do not overlap. Adjust as needed; the adhesive allows repositioning during install. Trim excess: Use a sharp utility knife and straightedge along ceilings, baseboards, and outlets. Final check: Smooth all seams and edges firmly to ensure full adhesion. Tip: If your walls are highly textured or unsealed, results may vary; testing a sample is recommended. Care Instructions Wipe gently with a soft, damp cloth and mild soap if needed. Avoid abrasives, harsh chemicals, and excessive scrubbing. Keep away from direct water spray and prolonged high humidity. To remove, peel slowly from a top corner at a 180-degree angle; proceed gently to protect the paint beneath. Good to Know Colors may appear slightly different in person due to screen settings and lighting; ordering a sample is recommended for exact tone and texture. Not recommended for textured walls, unprimed drywall, or surfaces painted with stain-resistant or low-energy coatings without prior testing.
