Assembly Instructions Product Description Reduce the handle bias of your Ryworx Omeme balisong with these ultra-light Zippy extension spacers. The spacers are made in-house from a shatter-proof polyurethane and protect the handles from drops. The spacers also feature positive jimping and an adjustable weight system to reduce the handle bias. Features Ultra-lightweight spacers reduce handle bias for a more neutral balance. Extend handles from 5.45" to 5.66". Adjust the balance: Each spacer holds up 3x removable tungsten weights, allowing you to fine-tune the balance of the Ryworx Omeme to your preference. Positive jimping for extra grip on ladders and chokers. The spacers are used with only 1x sexbolt to cut down weight, and each weigh 0.071 oz (empty), and up to 0.135 oz (all 3x weights installed). For comparison, the stock spacers each weigh 0.150 oz, and 0.192 oz when factoring in the 2x additional sexbolts. With Zippy spacers installed, the Ryworx Omeme (11) weighs 4.691 oz (empty), and up to 4.821 oz (all 6x weights installed). For comparison, the stock Omeme weighs 4.932 oz. Assembly Instructions Remove the stock spacer sexbolts and spacers. Insert the Zippy spacers. Apply inward pressure so that the extension is pressed into the handles to ensure the sexbolt holes line up. Insert the sexbolt while continuing to apply inward pressure. Then, tighten the spacer screw till there is a light resistance resistance. Insert the stock spacer below the Zippy spacer and tighten the spacer screw until the handles catch upon the stock spacer; then remove the stock spacer from the channel.
