Thermogroup Spartan Six Straight/Round 600x790x118mm 6 Bars 80Watts - Rail for plating S60SCPR Model: S60SCPR Specification Sheet (Click Here) The S60SCPR is part of our custom plated Heated Towel Rail range. This liquid-filled Heated Towel Rail can be plated in a range of custom finishes at your request. Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The S60SCPR is a Liquid Filled Rail, this means the heated towel rail is filled with liquid and heated by an electric element. As the water particles increase in temperature they circulate in the rail thereby heating the entire rail. Liquid Filled rails run at a higher temperature than an equivalent electric heated towel rail. The towel dryer is 600x790mm with six horizontal bars in a Polished Stainless Finish. The Heated Towel Rail comes as a prefilled unit meaning it is simply wired up like a standard towel rail on site. If the element was ever to fail it can be replaced without needing to replace the rail. The wiring position for the rail comes as standard on the right-hand side. A Liquid Filled Heated Towel Rail will take closer to an hour to reach a maximum temperature of around 55 -60 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs. Technical Data Output: 80Watts IP Rating: IPX5 Lead Length: 1.4m Voltage: 240V No of Bars: 6 Wiring Type: Concealed (hardwired) Wiring Position: Bottom right hand side Distance Between Mounting Points (Top to Bottom): 710mm Distance Between Mounting Points (Left to Right): 568mm EESS Equipment number E5383 - Manufacturer's Warranty: On the rail is 25 years for the rail and element, 5 years on the custom plated finish, and 5 years on the element (conditions apply).
Related
Related
Related
Related