The SA102 extends the Synergy array series with a smaller, lighter full-range powered cabinet. It’s ideal for medium and large venues, outdoor festivals, and inclined-seating theatres. The SA102 features a patented Paraline Lens to create a precisely shaped wavefront that matches the horn’s physical coverage pattern. It also uses Synergy Horn technology to couple the Paraline Lens with a 10-inch high-output woofer. The result is increased efficiency and directivity, without the comb-filtering often associated with arrayed horns and woofers. The cabinet can be used vertically or horizontally, and vertical coverage is asymmetrical so users can change the directivity by simply inverting the cabinet, without the complications of steering software or physically tilting the array. Pair with the SA115S subwoofer for the ultimate point source system. Features 2400 W Peak Power (1200 W Program) 10” LF Woofer with 3” Voice Coil 4” HF Driver Incorporates Tom Danley’s Patented Paraline Lens and Synergy Horn Technologies 1x XLR Input, 2x XLR Outputs Removable Locking powerCON® TRUE1 Input and Loop Thru Output Supports Vertical, Inverted Vertical, and Horizontal Placement Extremely Well-Controlled Coverage Pattern Made in Canada Specifications System Type Full-Range Powered Speaker Power Rating 2400 W Peak (1200 W Program) Measured Max SPL (C-Weighted CM Max Hold) 133 dB Peak, 127 dB Continuous Frequency Response (Hz +/- 3dB) 60 Hz - 18 kHz Dispersion (H x V) 30° x 45° Asymmetrical (7° Up, 38° Down) Crossover Frequency 750 Hz Cabinet Configuration Patented Synergy Horn and Paraline Lens Technology Driver Configuration 10" LF Woofer, 4” HF Compression Driver HF Driver(s) 4" Diaphragm, Neodymium HF Protection Peak and Average Limiting LF Driver(s) 10" Neodymium Woofer with 3" Voice Coil LF Protection Excursion, RMS HF Power Amplifier (Watts) 500 W Peak (300 W Program) HF Amplifier Type 3-Tier Class H LF Power Amplifier (Watts) 1600 W Peak (900 W Program) LF Amplifier Type Class D Cooling Scheme Convection Power Cable Removable Locking powerCON® TRUE1 Input and Loop Thru Output Power Consumption 200 VA / 400 VA Inputs 1x XLR Input Sensitivity (Vrms Sine) Line In 1.4 at Centre, 0.56 at Max Level Controls Volume EQ Controls HF Adjust, Mode Switch (Sub / No Sub) LED Indicators Power, Limit, Clip Bar Handles 1 (1x Each Side) Enclosure Materials Multi-ply 15 mm Birch Plywood Standard Rigging Hardware 1/4" - 20 Thread Eyebolts (4x Top, 4x Bottom) Stacking Feature Interlocking UHMW Feet (Top and Bottom) Covering / Finish Paint Dimensions (DWH) 21.3” x 17.4” x 22.8” (54 cm x 45 cm x 58 cm) Weight 69 lbs / 31.3 kg Specifications subject to change without notice
Related
Related
Related
Related