Add stability with a double barrel bushing combination Both bushings are 16mm tall – mix and match duros and shapes with no limitations 35.3mm total stack height including washers Kit of 2 bushings and 2 cup washers – enough for one truck Packed with a sticker in a recyclable paper bag Got the need for speed? A double barrel setup can we used to add stability and confidence to your ride. Our US-poured bushing formula will give you the perfect balance of dive, lean, turn and straight-line stability in the Barrel shape – perfect for all kinds of downhill skateboarding. We also include our washers, as we believe that a bushing is only as good as the washer it works with. Our cup washers really help increase bushing rebound and reduce wheelbite, allowing a softer durometer bushing overall – which in turn gives more turn and lean. Sabre Bushings are slightly taller than a lot of other longboard bushings out there, which allows for a little more lean and dive. As we use a slightly thinner washer than most other truck brands, the overall stack height works out pretty similar: Brand/Truck Total Stack Height Inc. washers Sabre Standard and Forged 35.3mm Bear Gen 6 34.6mm Paris V3 34.6mm Caliber III 32mm or 37.1mm Pantheon Stylus 34.2mm Another small detail that is worth mentioning is that unlike most other longboard bushings, our longboard bushings are equal heights for the top and bottom bushings. This means that you can switch shapes and durometers easily between trucks, allowing for easier and cheaper experimentation in your quest to find the combo that works for you. Each kit contains two bushings, two washers and a sticker, packed in a recyclable paper bag. Gravity poured from our own formula in the USA. Available Durometers: 86A Orange 90A Purple 93A Green 96A Grey 99A Yellow
