Samsung A05S Replacement Screen

3C Easy Markham Verified independent store

→

Samsung Galaxy A05s Replacement Screen with Frame Restore display image, touchscreen operation, and front-frame fitment on a compatible Samsung Galaxy A05s with this replacement sc reen assembly supplied with a preinstalled frame. The Samsung Galaxy A05s uses a 6.7-inch FHD+ PLS LCD display with a resolution of 1080 × 2400 pixels and a refresh rate of up to 90 Hz. This listing offers two replacement options: Refurbished original LCD screen with frame Genuine Samsung Service Pack screen with frame Both options are intended for customers and repair professionals seeking more consistent display performance, touch response, fitment, and frame alignment than many low-cost aftermarket alternatives. Because the display is already installed in a compatible middle frame, the repair does not require separating and rebonding the replacement panel to the original damaged frame. However, most internal components must still be transferred from the original phone. Compatible Models Samsung Galaxy A05s SM-A057F SM-A057F/DS SM-A057G SM-A057G/DS SM-A057G/DSN SM-A057M SM-A057M/DS Other compatible SM-A057 regional variants where the screen connector, frame design, antenna configuration, and internal mounting points match Samsung identifies the Galaxy A05s under the SM-A057 model family, with regional versions including models such as SM-A057F and SM-A057G/DSN. Please confirm the complete model number before ordering. The model number can normally be checked under: Settings > About Phone > Model Name or Model Number It may also appear on the original packaging, purchase documentation, SIM-tray area, or device information label. Do not select this component based only on the Galaxy A05s name. Regional models may differ in: SIM configuration Cellular antenna layout Internal brackets Side-button components Frame openings Flex-cable routing Connector positions Available frame colours Available Options Refurbished Original LCD Screen with Frame This option uses an original Samsung LCD display panel that has been professionally restored and installed into a compatible replacement frame. The refurbishment process may include: Removal of damaged outer glass Installation of replacement cover glass Replacement of optical adhesive Cleaning and reconditioning of the original LCD panel Restoration or replacement of touch-related layers where required Inspection of display flex cables and connectors Testing of image and touchscreen functionality Testing of brightness and refresh-rate behaviour Installation into a compatible replacement frame This option is intended to provide original-style LCD performance at a lower cost than a new genuine Samsung Service Pack assembly. Genuine Samsung Service Pack Screen with Frame This option is a genuine Samsung replacement display assembly supplied through Samsung’s service-parts distribution channel. A genuine Samsung Service Pack assembly is generally the preferred option for customers seeking: Genuine Samsung replacement components Factory-style FHD+ display quality Original brightness and colour characteristics Original-style touchscreen response Consistent 90 Hz display operation Factory-style frame construction and fitment More consistent cosmetic condition More predictable long-term performance than refurbished components Packaging, labels, frame colour, preinstalled small parts, and included components may vary by Samsung distribution region and production batch. Frame-Colour Selection The replacement screen assembly may be available in frame colours corresponding to original Galaxy A05s finishes. Possible colours may include: Black Silver Light Green Light Violet Other compatible regional colours where available Colour availability varies by region and supplier. Samsung markets the Galaxy A05s in multiple finishes, including black, silver, and light green in selected markets. Confirm the selected frame colour before ordering. Frame shade, surface finish, button colour, and antenna-line appearance may differ slightly from the original phone or product photographs. Key Features Replacement screen assembly for Samsung Galaxy A05s Compatible with selected SM-A057 regional variants Supplied with a preinstalled middle frame Available as refurbished original LCD or genuine Samsung Service Pack Integrated capacitive touchscreen 6.7-inch display format FHD+ 1080 × 2400 resolution PLS LCD display technology Designed to support refresh rates up to 90 Hz Designed to restore image and touchscreen operation May resolve cracked glass, failed touch, display lines, image distortion, or black-screen faults Screen-with-frame construction may simplify installation compared with panel-only replacement Suitable for professional repair and experienced installation Professional installation strongly recommended The original Galaxy A05s display specifications include a 6.7-inch FHD+ PLS LCD panel with up to 90 Hz operation. Common Screen-Failure Symptoms Replacement may be appropriate when the phone: Has cracked or shattered front glass Displays no image Shows vertical or horizontal lines Has black spots or damaged LCD areas Shows white patches or pressure marks Displays image distortion Flickers or produces intermittent images Has reduced or uneven brightness Shows discolouration Displays an image but does not respond to touch Has areas of missing or inaccurate touch response Registers unintended or ghost touches Produces sounds or vibrations while the screen remains black Has a bent or damaged original display frame Has separated display layers Shows abnormal scrolling or refresh-rate behaviour Fails after impact, pressure, twisting, or liquid exposure These symptoms may also be caused by: Logic-board damage Display-connector damage Liquid ingress or corrosion Battery failure Charging or power-management faults Damaged internal flex cables Software or firmware problems Incorrect installation Another defective component Proper diagnosis is recommended before replacing the display assembly. Refurbished Original LCD Quality Notes The refurbished option uses an original Samsung LCD panel that has previously been installed or used and has undergone professional restoration. Because the panel is refurbished, minor variation may be present in: Cosmetic condition Maximum brightness Colour temperature White balance Display uniformity Backlight consistency Low-brightness performance Existing pressure marks Oleophobic coating Cover-glass finish Edge appearance Refurbishment adhesive Component markings Touch sensitivity Refresh-rate consistency Long-term performance Minor cosmetic or performance variation that does not materially affect normal operation may be consistent with the refurbished nature of the component. A refurbished original LCD screen is not equivalent to a brand-new genuine Samsung Service Pack display. Samsung Service Pack Quality Notes The Service Pack option is intended to provide the closest available replacement to the original factory-installed screen assembly. Depending on the specific Service Pack and distribution region, the assembly may include: Genuine Samsung LCD display Integrated touchscreen Preinstalled middle frame Side-button components Volume-button components Meshes or seals Adhesive elements Small brackets Internal hardware Included components may vary. Do not assume that the assembly contains every part required to complete the repair. The battery, cameras, charging-port assembly, loudspeaker, earpiece speaker, vibration motor, fingerprint-sensor flex, antennas, logic board, back cover, and other internal components are not included unless specifically stated. LCD Display Characteristics The Galaxy A05s uses an LCD panel rather than an OLED display. LCD screens rely on a backlight positioned behind the image-producing layers. Potential characteristics include: Consistent full-screen illumination FHD+ image resolution Practical colour presentation Cost-effective replacement No OLED burn-in Suitable brightness for everyday use Smooth display operation up to 90 Hz when supported LCD panels are sensitive to: Impact Pressure Bending Twisting Internal debris Excessive heat Uneven frame surfaces Incorrectly positioned components Battery swelling Incorrect screw placement Internal LCD damage may occur even when the outer glass remains intact. Backlight and Display-Uniformity Notice Because this device uses an LCD panel, image visibility depends on the backlight system. After installation, test: Low brightness Medium brightness Maximum brightness Automatic brightness White backgrounds Grey backgrounds Dark backgrounds Solid-colour test screens Screen wake and sleep Outdoor visibility Possible LCD-related problems include: Uneven backlighting Bright or dark patches White pressure spots Light leakage around the edges Colour tint Flickering Reduced maximum brightness These symptoms may also be caused by: Logic-board display circuitry Connector damage Incorrect installation Internal pressure Software settings Battery condition Another defective component Refresh-Rate Notice The Galaxy A05s supports display operation at up to 90 Hz. Actual refresh-rate behaviour may depend on device settings, software, displayed content, battery condition, temperature, and the replacement screen revision. After installation, test: Standard screen operation Scrolling smoothness Touch responsiveness Motion clarity Display settings Low- and high-brightness operation Video playback Screen wake and sleep Battery consumption during normal use Refresh-rate problems may also be caused by: Display settings Power-saving settings Software or firmware Device temperature Battery condition Logic-board faults Incompatible screen revisions Installation damage A refresh-rate issue does not automatically confirm that the replacement display is defective. Touchscreen Notice The replacement screen includes an integrated capacitive touchscreen layer. After installation, test: Standard taps Swipe gestures Long presses Pinch-to-zoom Edge and corner response Keyboard input Gesture navigation Notification-panel access App navigation Multi-touch input Touch operation while charging Touch problems may also be caused by: Damaged display connectors Bent connector pins Logic-board faults Incorrect screen alignment Internal pressure Housing distortion Poor-quality charging accessories Software problems Another defective component Side-Mounted Fingerprint-Sensor Notice The Samsung Galaxy A05s uses a side-mounted fingerprint sensor rather than an in-display fingerprint sensor. The fingerprint sensor is separate from the replacement screen assembly and may be integrated with or positioned near the side-button components. Screen replacement does not repair or replace: Fingerprint-sensor hardware Fingerprint-sensor flex cable Side-button flex cable Logic-board biometric circuitry Software-related fingerprint faults After installation, test: Side-button operation Screen wake and lock Fingerprint recognition Fingerprint enrolment Multiple recognition attempts Power-menu access Fingerprint problems may be caused by: Damaged sensor hardware Torn flex cables Incorrect sensor alignment Missing brackets Side-button pressure Connector damage Software configuration Logic-board faults Improper component transfer Frame and Internal-Component Transfer Notice This screen is supplied with a frame, but installation still requires transferring compatible internal components from the original phone. Components that may require transfer include: Logic board Battery Charging-port assembly Front-facing camera Rear-camera modules Earpiece speaker Loudspeaker Vibration motor Side-mounted fingerprint sensor Side-button flex cables Volume-button flex cables Cellular antennas Wi-Fi and Bluetooth antennas SIM-related hardware Microphones Thermal pads Brackets Shields Screws Adhesive elements Back cover The exact transfer requirements depend on which components are preinstalled in the selected display assembly. Compare the replacement assembly carefully with the original phone before beginning installation. Frame Fitment Notice A screen-with-frame repair reduces the risk associated with separating and rebonding the display panel, but proper fitment still depends on: Correct model and regional frame Accurate internal-component transfer Proper screw placement Correct antenna installation Correct flex-cable routing Undamaged internal brackets Proper back-cover preparation Complete removal of old adhesive Suitable replacement adhesive Even pressure during curing Incorrect assembly may cause: Raised back-cover edges Display pressure Antenna or reception problems Button misalignment Fingerprint-sensor problems Charging problems Camera alignment issues Overheating Touch problems Internal LCD damage Backlight pressure spots Premature separation Battery and Internal-Pressure Notice Inspect the battery before transferring it into the replacement frame. Do not reuse a battery showing: Swelling Deformation Puncture damage Leakage Overheating Torn wrapping Unusual odour Pressure against the display or back cover A swollen or damaged battery may cause: LCD pressure spots Backlight damage Cracked glass Screen lifting Back-cover separation Touch failure Short circuits Excessive heat Fire or chemical hazards Logic-board damage Replace a swollen or physically damaged battery before completing the screen repair. Regional and Dual-SIM Compatibility Notice Galaxy A05s models sold in different regions may use different: SIM configurations Cellular antenna layouts Internal brackets Frame cut-outs Side-button components Fingerprint-sensor components Flex cables Connector arrangements Cellular hardware Before installation, compare: Complete model number Frame shape Antenna openings Flex-cable layout Button positions Fingerprint-sensor position SIM-tray position Internal mounting posts Printed part numbers Connector locations Camera openings Speaker and microphone openings Installing an incompatible frame may cause: Poor cellular reception Incorrect fitment Damaged flex cables Missing mounting points SIM-tray incompatibility Button problems Fingerprint-sensor failure Other functional faults Model Compatibility Notice This replacement assembly is intended only for the Samsung Galaxy A05s. It is not intended for: Samsung Galaxy A05 Samsung Galaxy A04 Samsung Galaxy A04s Samsung Galaxy A06 Samsung Galaxy A15 Other Galaxy A-series models The Galaxy A05 and Galaxy A05s are different devices and do not use interchangeable screen assemblies. Before ordering, confirm: The phone is a Samsung Galaxy A05s. The model number begins with SM-A057. The regional frame is compatible. The selected frame colour is correct. The connector and antenna layouts match. The device is not a Galaxy A05. Installation Notes Professional installation is strongly recommended. Screen-with-frame replacement requires extensive disassembly and transfer of multiple delicate internal components. Improper handling may damage: LCD display Backlight layers Touchscreen Logic board Battery Cameras Fingerprint sensor Charging-port assembly Antennas Side-button flex cables Speakers Microphones Internal connectors Back cover Before final installation: Confirm the complete device model number. Confirm regional and frame compatibility. Confirm the selected frame colour. Compare the replacement assembly with the original frame. Inspect the screen, frame, flex cables, and connectors. Check for shipping or handling damage. Inspect the battery for swelling or deformation. Power off the phone. Disconnect the battery before connecting or disconnecting the screen. Keep screws organized by location and length. Transfer all required thermal pads, brackets, meshes, shields, and cushions. Transfer the side-mounted fingerprint sensor carefully where required. Do not force connectors into place. Do not sharply bend, fold, puncture, or stretch flex cables. Avoid touching camera lenses and internal optical surfaces. Confirm correct antenna, button-flex, and fingerprint-sensor placement. Test the screen before resealing the back cover. Test black, white, grey, red, green, and blue backgrounds. Test brightness at low and high levels. Test automatic brightness. Check for backlight bleed or pressure spots. Test scrolling and 90 Hz operation where available. Test touch response across the complete display. Test all edges and corners. Test multi-touch gestures. Test the side-mounted fingerprint sensor. Test the side and volume buttons. Test the front and rear cameras. Test face recognition where enabled. Test proximity sensing. Test the earpiece speaker and loudspeaker. Test all microphones. Test vibration. Test wired charging and USB connectivity. Test Wi-Fi, Bluetooth, cellular reception, and GPS. Test both SIM positions on dual-SIM models where applicable. Check for overheating or abnormal battery drain. Confirm that the back cover sits evenly. Do not permanently seal the phone until all functions have been tested. Bent pins, damaged sockets, torn flex cables, excessive heat, pressure, incorrect screw placement, or improper component transfer may permanently damage the display or phone. Water-Resistance Notice Opening the Samsung Galaxy A05s compromises its original adhesive seals and protective assembly. Replacement adhesive may help reduce exposure to dust and incidental moisture, but water resistance cannot be restored or guaranteed after repair. A repaired device should not be relied upon for: Swimming Showering Underwater photography Exposure to steam Heavy rain High-humidity environments Other intentional liquid exposure Sealing performance may be reduced by: Frame damage Back-cover damage Adhesive quality Improper cleaning Uneven pressure Component misalignment Previous repairs Corrosion Production tolerances Avoid exposing the repaired device to water, steam, humidity, or other liquids. Package Contents Depending on the selected option: Refurbished Original LCD with Frame 1 × Refurbished original LCD replacement screen assembly 1 × Compatible preinstalled middle frame Genuine Samsung Service Pack with Frame 1 × Genuine Samsung Service Pack display assembly 1 × Genuine preinstalled middle frame Additional small components only where included by Samsung The following are not included unless specifically stated: Battery Back cover Cameras Fingerprint sensor Charging-port assembly Logic board Speakers Antennas Tools Adhesive Clamps Installation service Warranty This component includes a 30-day limited parts-only warranty against confirmed manufacturing or refurbishment defects, subject to the applicable 3C-Easy Markham Component Warranty. The warranty does not cover: Cracked, chipped, scratched, or shattered glass Internal LCD damage White spots, dark areas, lines, or backlight damage caused by impact or pressure Touch failure caused by installation damage Damage caused by a swollen battery Damage caused by incorrect component transfer Minor brightness, colour, backlight, or uniformity variation on a refurbished panel Minor cosmetic variation consistent with a refurbished component Reduced brightness compared with a new Service Pack display Backlight variation caused by panel history, pressure, installation, or unrelated hardware Refresh-rate problems caused by settings, software, battery condition, or logic-board faults Fingerprint-recognition problems caused by the original sensor, flex cable, alignment, software, or unrelated hardware Face-recognition problems caused by the original camera, software, or unrelated hardware Torn, folded, punctured, stretched, or damaged flex cables Bent connector pins or damaged logic-board sockets Damaged antennas or cellular components Incorrect model, region, frame colour, or revision selection Installation in an incompatible device Improper installation Physical, impact, pressure, bending, or twisting damage Liquid, moisture, or corrosion damage Damage caused by excessive heat Back-cover or adhesive failure Water-resistance or sealing limitations Display faults caused by the logic board Software, firmware, calibration, or compatibility limitations Damage to the battery or other components during installation Labour, diagnostics, installation, removal, shipping, or related repair costs The screen must be connected and fully tested before final installation. Remove protective films only after confirming correct image, touch, brightness, backlight uniformity, refresh-rate behaviour, frame fitment, and overall compatibility. Components showing installation or physical damage may not qualify for warranty coverage. Important Notes Replacement screen assembly for Samsung Galaxy A05s. Intended for compatible SM-A057 models. Available as refurbished original LCD with frame or genuine Samsung Service Pack with frame. Confirm the complete model number before ordering. Regional frame, SIM, antenna, and fingerprint-sensor configurations may differ. Confirm the selected frame colour before ordering. This screen is not compatible with the Samsung Galaxy A05. The refurbished option uses an original Samsung LCD panel with restored glass and related materials. The refurbished option is not equivalent to a new genuine Samsung Service Pack display. Minor cosmetic, brightness, colour, backlight, refresh-rate, or uniformity variation may be present on refurbished displays. Service Pack contents and preinstalled components may vary. Internal components must be transferred from the original phone unless specifically included. The Galaxy A05s uses a PLS LCD display, not OLED. The Galaxy A05s uses a side-mounted fingerprint sensor rather than an in-display fingerprint sensor. Check the battery for swelling before transferring it. Test image, touch, brightness, backlight uniformity, refresh rate, fingerprint recognition, cameras, charging, audio, vibration, sensors, SIM operation, and connectivity before sealing the phone. No tools or adhesive are included unless specifically stated. Water resistance cannot be restored or guaranteed after repair. Professional installation is strongly recommended. Product appearance, markings, frame shade, flex layout, included components, and packaging may vary between production batches. Samsung, Galaxy, and related trademarks belong to Samsung Electronics Co., Ltd. and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Samsung Electronics. Show more