Samsung Note 10 Plus Replacement Screen
Samsung Galaxy Note10+ Replacement Screen with Frame Restore display image, touchscreen response, S Pen input, ultrasonic fingerprint recognition, and front-frame fitment on a comp atible Samsung Galaxy Note10+ with this replacement screen assembly supplied with a preinstalled middle frame. The Samsung Galaxy Note10+ uses a 6.8-inch Quad HD+ Dynamic AMOLED display with curved edges, an integrated capacitive touchscreen, an S Pen digitizer layer, and an ultrasonic fingerprint sensor positioned beneath the display. This listing offers two replacement options: Refurbished original Samsung OLED screen with frame Genuine Samsung Service Pack screen with frame The refurbished option uses an original Samsung OLED panel that has been professionally restored and installed into a compatible replacement frame. The genuine Service Pack option is supplied through Samsung’s service-parts channel and is intended to provide display quality, brightness, colour reproduction, touch response, S Pen performance, fingerprint compatibility, and fitment closest to the original factory-installed screen. Because the display is already installed in a compatible middle frame, the repair does not require separating and rebonding the curved OLED panel to the original damaged frame. However, most internal components must still be transferred from the original phone. Compatible Models Samsung Galaxy Note10+ 4G SM-N975W — Canadian version SM-N975U — United States carrier version SM-N975U1 — United States factory-unlocked version SM-N975F SM-N975F/DS — International dual-SIM version SM-N9750 SM-N975N Other compatible SM-N975 regional variants where the frame design, display connector, antenna layout, fingerprint-sensor position, and internal mounting points match Please confirm the complete model number before ordering. The model number can normally be checked under: Settings > About Phone > Model Name or Model Number It may also appear on: Original packaging Purchase documentation Carrier account records Device information labels Internal service labels Do not select this component based only on the Galaxy Note10+ name. The Galaxy Note10+ 5G generally belongs to the SM-N976 model family and should not automatically be assumed to use the same screen-and-frame assembly. Confirm compatibility before ordering for any SM-N976 device. Regional models may differ in: Cellular antenna layout 5G or mmWave hardware SIM configuration Internal brackets Frame openings Connector revisions Side-button components Flex-cable routing Service-part revisions Available frame colours Available Options Refurbished Original Samsung OLED Screen with Frame This option uses an original Samsung Dynamic AMOLED display panel that has been professionally restored and installed into a compatible replacement middle frame. The refurbishment process may include: Removal of damaged outer glass Installation of replacement cover glass Replacement of optical adhesive Cleaning and restoration of the original OLED panel Replacement or restoration of touch-related layers where required Inspection of the S Pen digitizer layer Inspection of display flex cables and connectors Testing of image and touchscreen functionality Testing of S Pen input Testing of fingerprint-sensor compatibility Installation into a compatible replacement frame This option is intended to provide original Samsung OLED performance at a lower cost than a new genuine Samsung Service Pack assembly. Genuine Samsung Service Pack Screen with Frame This option is a genuine Samsung replacement display assembly supplied through Samsung’s service-parts distribution channel. A genuine Samsung Service Pack assembly is generally the preferred option for customers seeking: Genuine Samsung display construction Factory-style brightness Original-style colour accuracy Consistent touchscreen response Original S Pen digitizer performance Strong ultrasonic fingerprint compatibility Factory-style curved glass and panel geometry Genuine middle-frame construction Original-style panel thickness More predictable long-term performance Fitment closest to the original factory assembly Packaging, labels, protective films, frame colour, preinstalled small parts, and service-part revision may vary by Samsung distribution region and production batch. Frame-Colour Selection Replacement screen assemblies may be available with frame colours corresponding to original Galaxy Note10+ finishes. Possible colours may include: Aura Glow Aura Black Aura White Aura Blue Other compatible regional colours where available Confirm the selected frame colour before ordering. Frame shade, surface finish, side-button colour, antenna-line appearance, and internal details may differ slightly from the original device or product photographs. The colour of the replacement frame does not change the colour of the rear glass, which must normally be transferred or replaced separately. Key Features Replacement screen assembly for Samsung Galaxy Note10+ Designed for compatible SM-N975 regional variants Supplied with a preinstalled middle frame Available as refurbished original Samsung OLED or genuine Samsung Service Pack 6.8-inch curved display format Quad HD+ resolution class Dynamic AMOLED display technology Integrated capacitive touchscreen Integrated S Pen digitizer layer Designed to support ultrasonic in-display fingerprint recognition Original-style true black levels High OLED contrast Wide viewing angles Designed to restore image, touch, S Pen, fingerprint operation, and frame fitment Screen-with-frame construction may simplify installation compared with a panel-only replacement Professional installation strongly recommended Common Screen-Failure Symptoms Replacement may be appropriate when the phone: Has cracked or shattered front glass Displays no image Shows green, white, pink, or vertical lines Has black spots or spreading OLED damage Shows screen bleeding or discolouration Produces flickering or intermittent images Has reduced or uneven brightness Shows image distortion Displays an image but does not respond to touch Has areas of missing or inaccurate touch response Registers unintended or ghost touches Produces sounds or vibrations while the display remains black Has internal OLED damage without an external glass crack Has damaged or separated curved display edges Has a bent or damaged original middle frame Has failed after impact, pressure, bending, twisting, or liquid exposure Has S Pen dead zones caused by display damage Has fingerprint-recognition problems caused by display damage Shows abnormal Always-On Display operation These symptoms may also be caused by: Logic-board damage Display-connector damage Liquid ingress or corrosion Battery failure Charging or power-management faults Damaged fingerprint-sensor hardware S Pen or digitizer faults Software or firmware problems Damaged internal flex cables Incorrect installation Another defective component Proper diagnosis is recommended before replacing the display assembly. Refurbished Original OLED Quality Notes The refurbished option uses an original Samsung OLED panel that has previously been installed or used and has undergone professional restoration. Because the panel is refurbished, minor variation may be present in: Cosmetic condition Maximum brightness Colour temperature White balance Low-brightness uniformity Dark-grey uniformity Existing image retention Existing OLED wear Oleophobic coating Cover-glass finish Curved-edge appearance Black-border dimensions Refurbishment adhesive Component markings Touch sensitivity S Pen response Fingerprint response Long-term performance Minor cosmetic or performance variation that does not materially prevent normal operation may be consistent with the refurbished nature of the component. A refurbished original screen is not equivalent to: A brand-new genuine Samsung Service Pack display An unused original factory display A new Samsung retail device screen Refurbished OLED panels may retain some degree of previous pixel wear or faint image retention that is visible only under particular colours, brightness levels, or test conditions. Samsung Service Pack Quality Notes The genuine Samsung Service Pack option is intended to provide the closest available replacement to the original factory-installed display assembly. Depending on the specific Service Pack and distribution region, the assembly may include: Genuine Samsung Dynamic AMOLED display Integrated capacitive touchscreen Integrated S Pen digitizer layer Genuine preinstalled middle frame Side-button components Volume-button components Meshes or seals Adhesive elements Small brackets Internal hardware Included components may vary. Do not assume that the assembly contains every part required to complete the repair. The battery, cameras, charging-port assembly, loudspeaker, earpiece speaker, vibration motor, fingerprint sensor, wireless-charging coil, NFC components, antennas, logic board, S Pen, rear glass, and other major internal components are not included unless specifically stated. Dynamic AMOLED Display Characteristics The Galaxy Note10+ uses a Dynamic AMOLED display rather than an LCD panel. OLED pixels illuminate individually and do not require a separate conventional backlight. Potential benefits include: True black levels High contrast Wide viewing angles Strong dark-scene performance Thin panel construction Fast pixel response Efficient operation with darker screen content High-resolution image detail Original-style Always-On Display presentation Curved edge-to-edge appearance OLED panels are sensitive to: Impact Pressure Bending Twisting Internal debris Uneven internal surfaces Excessive heat Incorrectly positioned components Battery swelling Incorrect screw placement Frame distortion Internal OLED damage may occur even when the outer glass remains intact. Curved OLED Display Notice The Galaxy Note10+ uses a curved OLED panel that wraps toward both side edges of the device. Curved OLED panels are especially vulnerable to: Edge impacts Side pressure Frame distortion Twisting Incorrect alignment Uneven internal pressure Improper component transfer Excessive installation force Before installation, confirm that the replacement assembly: Matches the complete device model Has the correct curved-edge geometry Has no chips or cracks around the glass edges Has no internal pressure marks Sits evenly without force Matches the original connector and flex layout Do not press directly on the curved display edges during installation. Pressure applied to the curved areas may cause: OLED lines Black spots Display bleeding Touch failure Glass cracking Edge separation Permanent internal panel damage Touchscreen Notice The replacement screen includes an integrated capacitive touchscreen layer. After installation, test: Standard taps Swipe gestures Long presses Pinch-to-zoom Edge and corner response Curved-edge touch response Keyboard input Gesture navigation Notification-panel access App navigation Multi-touch input Touch operation while charging Accidental-touch protection settings Touch problems may also be caused by: Damaged display connectors Bent connector pins Logic-board faults Incorrect screen alignment Internal pressure Housing distortion Poor-quality charging accessories Software problems Another defective component S Pen Digitizer Notice The Galaxy Note10+ supports S Pen input through a digitizer layer integrated with the display assembly. After installation, test: S Pen detection Writing across the complete display Curved-edge response Corner response Hover detection Air Command activation Pressure sensitivity Palm rejection Screen-off memo Drawing and handwriting S Pen button functions where applicable S Pen problems may also be caused by: Damaged S Pen hardware S Pen battery or charging faults Magnetic accessories Incorrectly installed magnets Wireless-charging components Damaged digitizer circuitry Logic-board faults Internal pressure Frame distortion Display-connector damage Software settings Incompatible display revisions Magnetic cases, mounts, rings, wallets, and accessories may interfere with S Pen accuracy or create temporary dead zones. A problem with S Pen operation does not automatically confirm that the replacement display is defective. Ultrasonic Fingerprint-Sensor Notice The Galaxy Note10+ uses an ultrasonic fingerprint sensor positioned beneath the display. The fingerprint sensor is a separate internal component and may need to be transferred from the original frame unless specifically included with the selected screen assembly. After installation: Confirm the fingerprint sensor is positioned correctly. Ensure the sensor surface is clean. Transfer all required brackets, pads, and cushioning materials. Ensure no debris is trapped between the sensor and display. Ensure the display sits evenly above the sensor. Delete and re-enrol fingerprints where necessary. Test fingerprint recognition repeatedly. Test with and without a screen protector where applicable. Fingerprint performance may be affected by: Incorrect sensor alignment Damaged sensor hardware Missing brackets or pads Internal pressure Dry or damaged skin Thick or incompatible screen protectors Refurbished cover-glass construction Software configuration Logic-board faults Installation damage Fingerprint response on a refurbished screen may differ slightly from a new genuine Samsung Service Pack display. Fingerprint recognition cannot be guaranteed when the original sensor is damaged, contaminated, or improperly installed. Front-Camera and Sensor Notice The Galaxy Note10+ display includes a centred opening for the front-facing camera. The front camera and associated sensors are separate components and are not included with the replacement screen. During installation: Keep the camera opening free from dust and adhesive. Confirm correct alignment around the camera opening. Avoid covering sensor windows. Transfer all required meshes, brackets, seals, and cushioning materials. Avoid touching camera lenses and internal optical surfaces. After installation, test: Front-facing camera Face recognition where enabled Proximity sensing Automatic brightness Screen wake and sleep Earpiece-speaker operation A display replacement does not repair unrelated camera, sensor, or logic-board faults. Always-On Display Notice After installation, test: Always-On Display visibility Screen wake Tap to Wake Lift to Wake Brightness transitions Lock-screen operation Notification display Battery consumption Always-On Display behaviour may also depend on: Software version Display settings Power Saving Mode Battery condition Device temperature OLED panel condition Logic-board condition Minor low-brightness uniformity differences may be more visible on a refurbished OLED panel during Always-On Display operation. OLED Burn-In and Image-Retention Notice OLED technology may develop permanent burn-in or temporary image retention after extended display of static content. A refurbished original OLED panel may retain some degree of previous pixel wear. Image retention may be most visible with: White backgrounds Grey backgrounds Solid-colour test screens Low brightness Navigation bars Status icons Keyboard outlines Previously displayed static applications Minor pre-existing image retention that does not materially affect ordinary use may be consistent with a refurbished OLED component. Burn-in, image retention, or pixel wear that develops through subsequent use is not considered a manufacturing defect. Frame and Internal-Component Transfer Notice This display is supplied with a middle frame, but installation still requires transferring compatible internal components from the original phone. Components that may require transfer include: Logic board Battery Charging-port assembly Front-facing camera Rear-camera modules Earpiece speaker Loudspeaker Vibration motor Ultrasonic fingerprint sensor Side-button flex cables Volume-button flex cables Cellular antennas Wi-Fi and Bluetooth antennas SIM-related hardware Wireless-charging coil NFC components Microphones Thermal pads Brackets Shields Screws Adhesive elements Rear glass S Pen and S Pen-related components The exact transfer requirements depend on which components are preinstalled in the selected screen assembly. Compare the replacement assembly carefully with the original phone before beginning installation. Frame Fitment Notice A screen-with-frame repair reduces the risk associated with separating and rebonding a curved OLED panel, but correct fitment still depends on: Correct model and regional frame Correct 4G or 5G compatibility Accurate internal-component transfer Proper screw placement Correct antenna installation Correct flex-cable routing Undamaged internal brackets Correct fingerprint-sensor placement Proper rear-glass preparation Complete removal of old adhesive Suitable replacement adhesive Even pressure during curing Incorrect assembly may cause: Raised rear-glass edges Display pressure Antenna or reception problems Button misalignment Fingerprint-sensor problems S Pen dead zones Charging problems Wireless-charging problems Camera alignment issues Overheating Touch problems Internal OLED damage Premature separation Battery and Internal-Pressure Notice Inspect the battery before transferring it into the replacement frame. Do not reuse a battery showing: Swelling Deformation Puncture damage Leakage Overheating Torn wrapping Unusual odour Pressure against the display or rear glass A swollen or damaged battery may cause: Internal OLED pressure damage Black spots Display lines Cracked glass Screen lifting Rear-glass separation Touch failure S Pen dead zones Fingerprint-recognition problems Short circuits Excessive heat Fire or chemical hazards Logic-board damage Replace a swollen or physically damaged battery before completing the screen repair. Regional and 5G Compatibility Notice Galaxy Note10+ models sold in different regions may use different: Cellular antenna layouts 5G or mmWave components SIM configurations Internal brackets Frame cut-outs Side-button components Fingerprint-sensor components Flex cables Connector arrangements Cellular hardware Service-part revisions The SM-N975 Galaxy Note10+ 4G and SM-N976 Galaxy Note10+ 5G should not automatically be treated as interchangeable. Before installation, compare: Complete model number 4G or 5G device designation Frame shape Antenna openings Flex-cable layout Button positions Fingerprint-sensor position SIM-tray position Internal mounting posts Printed part numbers Connector locations Camera openings Speaker and microphone openings Installing an incompatible frame may cause: Poor cellular reception Incorrect fitment Damaged flex cables Missing mounting points SIM-tray incompatibility Button problems Fingerprint-sensor failure S Pen problems Other functional faults Model Compatibility Notice This replacement assembly is intended for compatible Samsung Galaxy Note10+ SM-N975 models. It is not automatically intended for: Samsung Galaxy Note10 Samsung Galaxy Note10 5G Samsung Galaxy Note10+ 5G SM-N976 Samsung Galaxy Note10 Lite Samsung Galaxy Note20 Samsung Galaxy Note20 Ultra Other Galaxy Note models Similar appearance, screen size, or model naming does not confirm compatibility. Before ordering, confirm: The phone is a Samsung Galaxy Note10+. The model number begins with SM-N975. The device is the correct 4G or regional configuration. The regional frame is compatible. The selected frame colour is correct. The display connector and antenna layouts match. The fingerprint-sensor position matches. The internal mounting points match. Installation Notes Professional installation is strongly recommended. Screen-with-frame replacement requires extensive disassembly and transfer of multiple delicate internal components. Improper handling may damage: Samsung OLED display Curved display edges Touchscreen S Pen digitizer Display flex cable Logic board Battery Fingerprint sensor Cameras Charging-port assembly Wireless-charging coil NFC components Antennas Side-button flex cables Speakers Microphones Internal connectors Rear glass Before final installation: Confirm the complete SM-N975 model number. Confirm that the device is not an incompatible SM-N976 variant. Confirm regional and frame compatibility. Confirm the selected frame colour. Confirm the screen option and service-part revision. Compare the replacement assembly with the original frame. Inspect the display, curved glass edges, frame, flex cables, and connectors. Check for shipping or handling damage. Inspect the battery for swelling or deformation. Power off the phone. Disconnect the battery before connecting or disconnecting the display. Keep screws organized by location and length. Transfer all required thermal pads, brackets, meshes, shields, and cushions. Transfer the fingerprint sensor carefully where required. Transfer wireless-charging and NFC components correctly. Do not force connectors into place. Do not sharply bend, fold, puncture, or stretch flex cables. Do not press directly on the curved OLED edges. Avoid touching camera lenses and internal optical surfaces. Confirm correct antenna, button-flex, fingerprint-sensor, and S Pen-related component placement. Test the screen before resealing the rear glass. Test black, white, grey, red, green, and blue backgrounds. Check for image retention or burn-in on refurbished panels. Test brightness at low and high levels. Test automatic brightness. Test Always-On Display. Test touch response across the complete display. Test the curved edges and all corners. Test multi-touch gestures. Test S Pen input across the complete display. Test S Pen hover and pressure response. Test fingerprint recognition. Test the side and volume buttons. Test the front and rear cameras. Test proximity and ambient-light functions. Test the earpiece speaker and loudspeaker. Test all microphones. Test vibration. Test wired charging and USB connectivity. Test wireless charging. Test NFC where applicable. Test Wi-Fi, Bluetooth, cellular reception, and GPS. Test both SIM positions on dual-SIM models where applicable. Check for overheating or abnormal battery drain. Confirm that the rear glass sits evenly. Do not permanently seal the phone until all functions have been tested. Bent pins, damaged sockets, torn flex cables, excessive heat, pressure, incorrect screw placement, or improper component transfer may permanently damage the display or phone. Water-Resistance Notice Opening the Samsung Galaxy Note10+ compromises its original factory adhesive and water-resistant sealing. Replacement adhesive may help reduce exposure to dust and incidental moisture, but the original IP rating and factory water resistance cannot be restored or guaranteed after repair. A repaired device should not be relied upon for: Swimming Showering Underwater photography Submersion Exposure to steam Heavy rain High-humidity environments Other intentional liquid exposure Sealing performance may be reduced by: Frame damage Rear-glass damage Adhesive quality Improper cleaning Uneven pressure Component misalignment Previous repairs Corrosion Production tolerances Avoid exposing the repaired device to water, steam, high humidity, or other liquids. Package Contents Depending on the selected option: Refurbished Original OLED with Frame 1 × Refurbished original Samsung OLED replacement screen assembly 1 × Compatible preinstalled middle frame Selected small components only where included by the supplier Genuine Samsung Service Pack with Frame 1 × Genuine Samsung Service Pack replacement screen assembly 1 × Genuine preinstalled middle frame Additional small components only where included by Samsung The following are not included unless specifically stated: Battery Rear glass Fingerprint sensor S Pen Cameras Charging-port assembly Logic board Wireless-charging coil NFC components Speakers Antennas Tools Adhesive Clamps Installation service Warranty This component includes a 30-day limited parts-only warranty against confirmed manufacturing or refurbishment defects, subject to the applicable 3C-Easy Markham Component Warranty. The warranty does not cover: Cracked, chipped, scratched, or shattered glass Internal OLED damage Black spots, lines, bleeding, or discolouration caused by impact or pressure Damage to curved display edges Touch failure caused by installation damage S Pen problems caused by the S Pen, magnets, transferred components, installation, software, or unrelated hardware Fingerprint-recognition problems caused by the original sensor, alignment, transferred components, screen protectors, software, or unrelated hardware Existing image retention or minor OLED wear consistent with a refurbished panel Burn-in or image retention that develops through subsequent use Minor brightness, colour, white-balance, or uniformity variation on a refurbished panel Minor cosmetic variation consistent with a refurbished component Reduced brightness compared with a new genuine Service Pack display Always-On Display variation on a refurbished screen Damage caused by a swollen battery Damage caused by incorrect component transfer Damage caused by magnetic accessories Brightness or colour problems caused by software, settings, temperature, or logic-board faults Torn, folded, punctured, stretched, or damaged flex cables Bent connector pins or damaged logic-board sockets Damaged antennas or cellular components Incorrect model, 4G or 5G version, region, frame colour, or screen revision selection Installation in an incompatible device Improper installation Physical, impact, pressure, bending, or twisting damage Liquid, moisture, or corrosion damage Damage caused by excessive heat Rear-glass or adhesive failure Water-resistance or sealing limitations Display faults caused by the logic board Software, firmware, calibration, pairing, or compatibility limitations Damage to the battery, fingerprint sensor, wireless-charging components, or other parts during installation Labour, diagnostics, programming, installation, removal, shipping, or related repair costs The screen must be connected and fully tested before final installation. Remove protective films only after confirming correct image, touch, brightness, S Pen operation, fingerprint recognition, frame fitment, and overall compatibility. Components showing installation marks, flex-cable damage, pressure damage, scratches, adhesive residue, chipped edges, or other physical damage may not qualify for warranty coverage. Important Notes Replacement screen assembly for Samsung Galaxy Note10+. Primarily intended for compatible SM-N975 model variants. Available as refurbished original Samsung OLED with frame or genuine Samsung Service Pack with frame. Confirm the complete model number before ordering. Do not assume compatibility with SM-N976 Galaxy Note10+ 5G models. Confirm the selected frame colour and screen option. Regional frame, SIM, antenna, fingerprint-sensor, and cellular configurations may differ. This screen is not compatible with the standard Galaxy Note10 or Note10 Lite. The original Galaxy Note10+ uses a curved 6.8-inch Dynamic AMOLED display. The display includes an integrated S Pen digitizer layer. The refurbished option uses an original Samsung OLED panel with professionally restored glass and related materials. A refurbished screen is not equivalent to a brand-new genuine Samsung Service Pack display. Minor cosmetic variation, OLED wear, brightness variation, or faint image retention may be present on refurbished panels. The Service Pack option uses a genuine Samsung replacement display. Service Pack contents and preinstalled small components may vary. Most internal components must be transferred from the original phone. The fingerprint sensor, S Pen, battery, rear glass, and wireless-charging components are not included unless specifically stated. Inspect the battery for swelling before transferring it. Test image, touch, brightness, S Pen, fingerprint recognition, cameras, charging, wireless charging, NFC, audio, vibration, sensors, SIM operation, and connectivity before sealing the phone. No tools or rear-glass adhesive are included unless specifically stated. Original water resistance cannot be restored or guaranteed after repair. Professional installation is strongly recommended. Product appearance, labels, protective films, frame shade, service-part numbers, flex layout, included components, and packaging may vary between production batches. Samsung, Galaxy, Galaxy Note, Dynamic AMOLED, S Pen, and related trademarks belong to Samsung Electronics Co., Ltd. and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Samsung Electronics.
More you might like
Related
Samsung Note 10 Plus / Note 10 Repair
Related
Battery For Samsung Galaxy Note 10 Plus, Galaxy Note 10+, Ga
Related
Samsung S9 Plus / S10 / Note 9 / Note 10 Plus Earpiece
Related