SPECIFICATIONSBattery Included: NoBrand Name: samwhadspCable length: 2mCertification: CEElectronic: NoHigh-concerned chemical: NoneOrigin: Mainland ChinaTheory: Temperature Controller General * Temperature Sensor 1Set* Humidity Sensor 1 Set (Order separately)* 4 Fan Relay Outputs* 1 Cool Relay Output* 1 Spray(OPT) Relay Output*1 Heat Relay Output* 1 Alarm Relay Output INSTALLATION 1. Connect the TP54 to the wall in a dry place approximately 1 meter away from the electricalcabinet.2. Connect a 220VAC cable to the L,N connector. This is the unit power input.3. Connect a protective conductor (P.E.) to the G (Ground) connector. If the earth electroderesistance is more than 5 ohms, change a new earth electrode to connect TP54. Analog Input Connections 1. Temperature sensorsT-IN is used for indoor temperature sensor.Use a two wire cable.Connect one wire to analog input T- IN;and second wire to the 0V input.2. Humidity sensorHUM is used for indoor humidity sensor.Use a three-wire cable. Brown to input 12V,Green to 0V andwhite to HUM. Network Connection Using RS-485 Cable connect between TP54and Converter. One wire connects D+ ; another connects D-and shield connects G. Relay Connections Connect the relay outputs to the various systems.All outputs are dry contact, maximum3A/250VAC.And connect the relay alarm to the external relay.Analog out ConnectionA-OUT is used for the variable speed fan (inverter). Specifications Input Power Voltage.......: 220VAC Frequency......................: 50/60HzElectric Power................: 9VAOutput...........................: 5A/250VACAlarm Output.................: 0.5A 250VAC/1A 30VDCTemperature for using....:-20~60℃Measurement range temperature..：-10~70℃Accurate valueDeviation value.......: 0.1℃Measurement range Humidity........：0.0-99.9%RHAccurate value...............................：0.1%Deviation value..............................：±5%
