This 3D printable Splinter's Edge Mining Outpost is perfect for 28mm - 40mm sci-fi wargaming tables. Comprised of a large, multi-floor control building connected to a modular walkway bridge. Each 'roof' section of the control building has OpenLOCK ports allowing you to connect a number of accessory pieces like ladders, aircon units, vents, a large pipe, and wall additions. The 70mm wide walkways also have built-in OpenLOCK ports giving loads of modular options for walkway length and also adding accessory pieces. The underslung walkway architectural supports have the option of creating hanging cabling by insert lengths of snipped PLA filament into the receiving holes. The pillars and corresponding connecting rings make a piece 75mm (3 inches) tall so it's pretty easy to build a 150mm (6 inches) tall walkway section, ideal for elevation in certain galactic scifi games. Dimensions: Control Building Lower - 189mm x 188mm x 71mmControl Building Lower Roof - 160mm x 185mm x 10mmControl Building Middle - 135mm x 163mm x 71mmControl Building Middle Roof - 160mm x 185mm x 10mmControl Building Top - 82mm x 119mm x 71mmControl Building Top Roof - 82mm x 113mm x 38mm Pillars - 51mm x 76mm x 70mmUndersupport - 13mm x 99mm x 20mmRiser - 23mm x 46mm x 133mm Walkway - 70mm x 100mm x 17mm Recommended printing resolution - 0.2mm. All files can be printed on a 200mm x 200mm print bed. No need for supports for the majority of pieces*.Everything is ready to throw into your slicer of choice and start printing * You may prefer to add manual supports to the insides of the doorframes, depending on how well your machine handles bridging.
