This SUB mount kit fits the OEM Billet and Forged Triple clamps. All stock handlebar mounting components are removed and discarded from the OEM triple clamps, including rubber cone mounting bushings if equipped. Eliminating the Stock rubber bar cones decreases possible distortion in the event of a crash. The supplied Rubber SUB mount adapter will sit on top of our unique aluminum "solid" mounted bar cone system. MED and SOFT compound bushings are provided for individual preferences. This SUB mount kit will raise the bars 24mm in height and locates the bars in Position 2 / 7mm forward from stock. MED and SOFT compound bushings are provided for individual preferences. The new design frame bracket consists of three parts. on most models, installation is done without removing the top triple clamp. Models equipped with a factory steering lock will require the locking device to be removed as it will not clear the damper mounting components. Removal of the steering lock does require the triple clamp to be taken off and then re-installed. Step by step pictured instructions are included along with all the necessary hardware. "SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. "Bar reducers" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions. If you have any questions, feel free to call or email us. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike. Please call to verify fitment before purchase
Related
Related
Related
Related