Mofo RC C1 "Class 1" Chassis Kit The most comprehensive and complete "Class 1" micro chassis ever made. Class 1 could be considered the most challenging class to compete in. With restrictions not seen in C2 or C3 it can be very difficult to build a very effective C1 Rig. So Mofo Rc has taken out 90% of the guesswork and planning required. The Only thing youll need to do is figure out where you’re going to post your podium finish pictures and where to hang your trophies. :) Material Cost Rail Weight Strength 6061 Aluminum $ # Weaker Stainless Steel $$ ## Strong Titanium $$$ # Strongest Specs: Made in Texas Inline, Flat Skid Plate Non-intrusive, Well-Positioned Shock Mounts Easy-to-Install, Durable Upper Link Mount Positions Stock-Location Bumper Mounts Low Center of Gravity while limiting hangups or clearance issues Designed for Forward Mounted Motors, Can be used with others. Includes: Rails in Material Chosen Side Slider Boards LCG Battery Tray Front and Side Upright ESC Trays Body Magnet Mount Pair (Front/Rear) Hardware Pack Recommended Option: Forward Dual Pattern Transmission Conversion Kit and Skid Plate(Also Sold Separately) Accepts 9mm/10mm pattern brushless or 030/050 brushed motors Forward Mounting Position Lower Center of Gravity (COG), Better Side Hill/Climbing Angle Laser Sintered Nylon Transmission Case w/ Aluminum Mounting Plate Requires: Internal gears and bearings Recommended Setup: Electronics Brushed: Mofo RC | TorqueBeast 30/50 Brushless: Mofo RC | NanoBeast w/ Mod.3 11t Pinion ESC: Mofo RC | Rockwolf Brushed/Brushless ESC Servo: Mofo RC | Black Label 2.0, Servo Beast Chassis Components Link Set- Stainless or Titanium Standard: C10 Front (50mm Lower, 39.5mm Upper) C10 Rear (58.5mm Lower, 51mm Upper) XL: C10/Gladiator Front: (58.5mm Lower, 51mm Upper) Gladiator/Power Wagon Rear (78mm Lower, 70mm Upper) Transmission: Mofo RC | Trans Conversion or Aluminum/Brass Bulletproof Transmission Driveshafts: Standard: 40mm-52mm Front, 52mm-72mm Rear XL: 40mm-52mm Front, 65mm-95mm Rear Axles: Mofo RC X15s, Mofo RC 44s Shocks: ~39-52mm Extras/Nice to Haves CowRC Udder Butter Grease Mofo RC 0.05" Hex Driver Mofo RC 1.5mm Hex Driver Mofo RC 4mm Nut Driver Side Cutters File/Sandpaper Blue Threadlocker CA Glue Important Notes: Plastic pieces are constructed out of SLS Nylon 12. Due to the small hole size and material, we recommend you lightly snug parts. Do not over tighten them as it is easy to do so with the small M1.4 screws included. Super/CA glue can be used on the screw threads to as a thread locker in the plastic pieces. Use side cutters and sand free from parts tree and smooth Utilizes any stock location SCX24 skid plate.
Related
Related
Related
Related