Unique design accommodates both wood and metal doors Fail-secure operation Reversible for right or left-handed doors Zinc alloy body Corrosion-resistant case and moving parts Complete mounting hardware included Operating voltage: 12~24 VAC/VDC 1,034-lb (470kg) Holding force Tested to 250,000 cycles Current draw: 500mA@12VDC, 1A@24VDC Strike depth: 9/16” (15mm) Faceplate size: 31/2“x17/16“x1/8” (89x35x3 mm) Weather-resistant IP42 Specifications Operating Voltage 12~24 VAC/VDC Operation Fail-Secure Current Draw 500MA@12VDC , 1A@24VDC Keeper Width 1-5/8″ (41mm) Design Reversible non-handed Strike Depth 9/16″ (15mm) Operating Temperature 14°~113° F (-10°~45° C) Operating Humidity 0~95% RH (no condensation) Dimensions 3-1/2″x1-7/16″x1/8″ (89x35x3 mm) Holding Force 1,034-lb (470kg) IP Rating Weather-resistant IP42 Troubleshooting Electric strike does not activate Remove the strike and check that the wires are connected properly. Use a multimeter to test that the strike is receiving the proper voltage and amperage. If it is not, it may be necessary to use heavier gauge wires, or increase the output of the power supply Make sure the activation device (keypad or pushbutton switch) is working properly Door does not open when the electric strike is activated Check that the door latch is operating properly, and replace if necessary The position of the electric strike may need to be adjusted by moving it or adding washers or shims
