sE Electronics DM1 Dynamite Active Inline Mic Pre Amp The DM1 DYNAMITE provides a massive +28dB of clean, transparent gain. For all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. Description Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards. Features +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOADdesigned for neutral, balanced sound quality the perfect way to boost the signal of a passive microphone gain stays consistent regardless of connected load provides significantly improved level to your mic preamp for proper gain staging SOPHISTICATED CLASS-A ELECTRONICS state of the art electronics and high-grade FETs provide supremely low noise transformerless design for pristine sound quality provides the lowest noise in its class DEDICATED OUTPUT BUFFER AMPLIFIER provides +28dB output independent of load impedance or cable length extremely low output impedance drives long cable runs and can reduce susceptibility to RF interference, buzz & hum SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH efficient rejection of any electrical interference and noise high-quality finish ensures a great look for many years slim design allows for easy placement in the studio or on stage GOLD-PLATED XLR CONNECTOR for loss-free and reliable signal connection Specs Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB) Gain: 28 dB (load 1kOhms) Max output level (0.5% THD): 8.3 dBV (2.6 V) Output noise level: 9 μV (JIS-A) Powering: 48 Volts according toIEC 61938 Electrical impedance: 135 Ohms Recommended load impedance: >1k Ohms Current consumption: 3.0 mA Connectivity: 3-pin male/female XLR connector Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.) Weight: 80 g (2.82 oz.) SYSTEM REQUIREMENTSInput: passive microphone (ribbon/dynamic)Output: preamp/mixer/audio interface providing 48V phantom power LIMITATIONSNot suitable for phantom-powered microphones (condenser microphones, active ribbon microphones) .
