Upgrade your SEAT Leon MK2 with our sleek and stylish Finned Diffuser. Transform your rear bumper and achieve a more dynamic look for your car. Elevate your driving experience now! This product is a direct replacement for your OEM bumper diffuser panel, manufactured in GRP and finished in a gloss black. Please Note: This product may require some trimming / sanding to ensure the perfect fit. Fitting guidance1 - Make sure the clips are sanded to a thickness of around 4mm max. 2 - Lube up the clip area on the cars bumper, around the clip section (WD40). 3 - Take a blunt screwdriver or such like to the clip section on the bumper and prise open the clips holes (don’t worry they won't break, the plastic clip section on the bumper will form its original shape once you have fitted the diffuser) Doing this will help the clips slot in as they are bigger than the original clips. 4—Start from one end of the diffuser. You will notice that once a few clips are in, it will become a bit tougher. As you get to the tighter/tougher area of the diffuser, you’ll need a hand pushing from behind the bumper and the other pushing against the diffuser, forcing the diffuser into the bumper and pulling the parts together. 5- If the clips look like are not lining up, lift the diffuser upwards whilst still pushing against the bumper. You may need to repeat step 5 for all the clips across the top section of the diffuser, the more clips you get in the easier it becomes and it should end up in place towards the last few clips.Please try to ignore the fact it looks like it doesn’t fit. It does. We understand these diffusers can be harder to fit than most of our products so please get in touch if any help fitting is required. We are more than happy to fit these for you.
