Securitron EEB3N Install the EEB Emergency Exit Button next to the door to provide additional safety and redundancy as required by code when using a motion detector for a request to exit device. Model EEB2 is a two-inch square, exit button, mounted on a stainless steel (S.S.), single gang key plate These units are intended only for release of a magnetic lock from the inside of a door. When the button is pressed, the lock releases for 30 seconds. If pressed again during the 30-second lock release period, the unit will “retrigger” starting a new 30-second lock release period. These buttons are specifically intended for installation on access controlled egress doors, as described in the Building Officials and Code Administrators (BOCA) code. A motion detector, such as the Securitron Model XMS, is the primary means of magnetic lock release on the door. The EEB2 or EEB3N exit button is employed as a backup means of releasing the lock in case of a problem with the motion detector. It should be noted that the exact release time will vary with temperature, but it will not be less than 30 seconds. Main Features Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor Mounted next to door Momentarily pressing the button releases door for 30 seconds Retriggerable Single Gang or Narrow Stile SPDT 3 Amp wet N/C contacts Operates on 12 or 24 VDC (must be same voltage as the installed lock) For indoor use only EEB2 includes switchable green, red and blue ADA lenses EEB3N includes switchable green and red lenses UL Listed
