1.92TB 2.5-inch SATA enterprise SSD Kingston DC600M 1.92TB SEDC600M/1920G Mixed-Use Enterprise SSD The Kingston DC600M 1.92TB SEDC600M/1920G is a 2.5-inch SATA 6Gb/s enterprise SSD for mixed-use server workloads, combining 3D TLC NAND, hardware-based power-loss protection, up to 560MB/s read, up to 530MB/s write and 3,504TBW endurance. 1.92TB capacity Up to 560MB/s read Up to 530MB/s write Hardware power-loss protection 3,504TBW 5-year limited warranty Capacity 1.92TB Sequential read/write Up to 560/530MB/s Endurance 3,504TBW; 1 DWPD Encryption Not included on DC600M Consistent SATA storage for mixed-use server workloads The Kingston DC600M 1.92TB SEDC600M/1920G is designed for data centres, system integrators and server environments that need predictable latency and IOPS. Its enterprise SMART tools, hot-swap capability and onboard power-loss capacitors support operational monitoring and safer recovery after an unexpected power interruption. Mixed-use enterprise design The DC600M platform is positioned for server workloads that combine reading and writing. Hardware power-loss protection Onboard capacitors help reduce the risk of data loss or corruption during an unexpected power interruption. Steady-state QoS The exact capacity has published 99.999th-percentile read/write latency of 200/300 µs. Capacity-specific endurance This 1.92TB model is rated for 3,504TBW and 1 drive write per day over five years. Enterprise SMART tools Reliability, usage, remaining life, wear and temperature can be monitored through supported SMART tooling. 3D TLC with DRAM cache Kingston specifies 3D TLC NAND and a DRAM cache for the DC600M series. Who is the Kingston DC600M 1.92TB SEDC600M/1920G best for? A strong choice for Mixed-use server storage Data-centre SATA drive replacement Rack-mount server environments System-integrator deployments Applications that benefit from hardware power-loss protection Consider another model if you need You require built-in AES 256-bit or TCG Opal 2.0 encryption You need NVMe rather than SATA performance Your server compatibility list does not include this exact part number Your planned write workload exceeds 3,504TBW or 1 DWPD Key specifications Official part number SEDC600M/1920G Capacity 1.92TB Form factor 2.5-inch, 7 mm Interface SATA Rev. 3.0, 6Gb/s NAND 3D TLC DRAM cache Yes Sequential read Up to 560MB/s Sequential write Up to 530MB/s Steady-state random read/write 94,000/78,000 IOPS Endurance 3,504TBW; 1 DWPD over 5 years Power-loss protection Hardware-based Encryption Not included on DC600M Warranty Limited 5-year warranty, subject to SSD wear condition Full technical specifications Capacity, interface and performance Series Kingston DC600M Official part number SEDC600M/1920G Capacity 1.92TB Form factor 2.5-inch Interface SATA Rev. 3.0, 6Gb/s Backward interface compatibility SATA Rev. 2.0, 3Gb/s NAND 3D TLC DRAM cache Yes Encryption Not included on DC600M Sequential read Up to 560MB/s Sequential write Up to 530MB/s Steady-state random 4K read 94,000 IOPS Steady-state random 4K write 78,000 IOPS QoS latency, read/write, 99.999th percentile 200/300 µs Reliability, endurance and management Hardware power-loss protection Yes Hot-swappable Yes Enterprise SMART tools Reliability, usage, remaining life, wear levelling and temperature Static and dynamic wear levelling Supported Endurance 3,504TBW Drive writes per day 1 DWPD over 5 years MTBF 2 million hours Uncorrectable bit error rate ?10^-17 Limited warranty 5 years, subject to SSD wear condition Physical, environmental and power Dimensions 69.9 × 100 × 7 mm Weight 92.34 g Idle power 1.30 W Average power 1.45 W Maximum read power 1.6 W Maximum write power 3.6 W Operating temperature 0°C to 70°C Storage temperature -40°C to 85°C Operating vibration 2.17 G maximum, 7–800 Hz Non-operating vibration 20 G maximum, 10–2,000 Hz Frequently asked questions about the Kingston DC600M 1.92TB SEDC600M/1920G What is the Kingston DC600M 1.92TB SEDC600M/1920G?It is a 1.92TB 2.5-inch SATA enterprise SSD designed for mixed-use server workloads.What performance does the SEDC600M/1920G provide?The exact model is rated for sequential reads up to 560MB/s and sequential writes up to 530MB/s.What random performance applies to the SEDC600M/1920G?Kingston specifies steady-state random 4K performance of 94,000 read IOPS and 78,000 write IOPS.What endurance rating applies to the SEDC600M/1920G?The exact 1.92TB model is rated for 3,504TBW and 1 DWPD over five years.Does the SEDC600M/1920G include power-loss protection?Yes. It includes hardware-based power-loss protection using onboard capacitors.Does the SEDC600M/1920G support encryption?No. Kingston specifies no encryption for DC600M; AES 256-bit and TCG Opal 2.0 are features of the separate DC600ME range.What interface does the SEDC600M/1920G use?It uses SATA Rev. 3.0 at 6Gb/s and is backward compatible with SATA Rev. 2.0 at 3Gb/s.Is the SEDC600M/1920G hot-swappable?Yes. Kingston lists the DC600M as hot-swappable, subject to support from the host system and enclosure.What are the SEDC600M/1920G dimensions?It measures 69.9 × 100 × 7 mm and weighs 92.34 g.What warranty applies to the SEDC600M/1920G?Kingston specifies a limited five-year warranty, subject to the stated SSD wear condition and regional terms. Important information: This exact DC600M model does not include AES 256-bit encryption or TCG Opal 2.0. Confirm the exact part number on the server or storage-platform compatibility list before deployment. Usable capacity is lower than the nominal capacity after formatting and system use. Performance and latency figures are manufacturer ratings measured under stated test conditions.
Related
Related
Related
Related