Description Seeed Studio reComputer R1025-10 is a fanless industrial IoT gateway and controller powered by the Raspberry Pi Compute Module 4. This configuration combines a quad-core Cortex-A72 1.5GHz CPU, 4GB RAM, and 32GB eMMC with rich industrial connectivity, making it a practical platform for smart building, industrial edge computing, fleet management, remote control, energy systems, and industrial IoT integration. The R1025-10 is part of the reComputer R1000 family, so the real value is not raw AI performance alone. It gives you dual Ethernet, 3 isolated RS485 ports, HDMI, M.2 NVMe SSD expansion, PoE support, optional 4G LTE, LoRa, Zigbee, Wi-Fi/BLE, as well as optional TPM 2.0 and SuperCAP UPS. That makes it much better suited to real-world gateways and industrial controllers than a generic Raspberry Pi setup. If your project centers on BACnet, Modbus, Node-RED, Home Assistant, or edge protocol integration, the R1025-10 is one of the most practical entry points in the reComputer R1000 lineup. It is especially useful when you want reliable industrial interfaces and Raspberry Pi software flexibility in one compact fanless system. Features Raspberry Pi CM4 platform: Quad-core Cortex-A72 at 1.5GHz with 4GB RAM and 32GB eMMC for stable edge control and gateway workloads. Industrial communication ready: Includes 3 isolated RS485 interfaces and supports BACnet and Modbus workflows. Flexible network connectivity: Dual Ethernet, optional PoE, optional 4G LTE, LoRa, Zigbee, and Wi-Fi/BLE. Reliable edge deployment: Fanless cooling, IP40, -30°C to 70°C, TPM 2.0 optional, and SuperCAP UPS optional. Expandable R1000 architecture: Supports M.2 NVMe SSD, Mini-PCIe wireless expansion, and long-lifecycle industrial deployment. Specifications Product reComputer R1025-10 Product Series R1000 CPU Raspberry Pi CM4, Quad-core Cortex-A72 @ 1.5GHz Operating System Raspberry Pi OS, Ubuntu, Debian RAM 4GB eMMC 32GB Input 2-pin terminal block PoE IEEE 802.3af standard, 12.95W PoE optional Supply Voltage 12~24V AC / 9~36V DC Overvoltage Protection 40V Power Consumption Idle 2.88W, full load 5.52W Ethernet 1 x 10/100/1000 Mbps with PoE support, 1 x 10/100 Mbps USB 2 x USB-A 2.0 host, 1 x USB-C 2.0 for OS flashing RS485 3 x 3-pin terminal block, isolated HDMI 1 x HDMI 2.0 SIM Card Slot Supports standard SIM card M.2 Slot Supports M.2 NVMe SSD Wireless Expansion USB LoRa, SPI LoRa, 4G LTE, USB Zigbee, Wi-Fi/BLE optional Ingress Protection IP40 Operating Temperature -30°C to 70°C Storage Temperature -40°C to 80°C Operating Humidity 10% to 95% RH UPS SuperCAP UPS LTC3350 module optional Security TPM 2.0 optional, ATECC608A Heat Dissipation Fanless Warranty 2 years Production Lifetime Until at least December 2034 Applications Smart building and BMS: A strong fit for FIN Framework, FUXA, BACnet, and Modbus integration. Industrial automation and gateways: Ideal for protocol conversion, remote monitoring, equipment integration, and edge data collection. Home and facility automation: Works well with Home Assistant and Node-RED. Fleet and remote deployments: Useful for connected field systems that need LTE, LoRa, Zigbee, GPS, and secure edge control. Product List reComputer R1000 x1 DIN-rail clip x1 Screw Pack x1 DC Power Female Jack to Screw Terminal Adapter x1 3-pin Terminal Block Connector (Male) x3 120 Ohm Resistor x5 User Manual x1 Other Content The R1000 line is built around protocol-rich edge control, not generic SBC usage. The combination of 3 isolated RS485 ports, dual Ethernet, optional wireless modules, and Raspberry Pi software flexibility makes the R1025-10 especially practical for protocol gateways and controller workloads. If you prefer no-code or low-code orchestration, the official Node-RED guide is one of the best ways to start. For smarter home and building scenarios, the official Home Assistant guide is also directly relevant. If you need more memory in the same R1000 family, compare it with reComputer R1035-10. If your project needs extra isolated serial interfaces, reComputer R1125-10 is also worth comparing. For the broader lineup, the reComputer collection page is useful. Resources reComputer R1000 First Look Guide User Manual 3D File Schematic and PCB Design Files Node-RED Getting Started Home Assistant Guide FUXA with Modbus RTU and TCP FIN Framework Guide FAQ What is the difference between reComputer R1025-10 and R1035-10? reComputer R1035-10 is the stronger configuration in the same R1000 family, typically chosen when you want more memory headroom. R1025-10 keeps the same industrial gateway philosophy but stays at 4GB RAM and 32GB eMMC, which is often enough for many gateway, protocol, and controller tasks. Is R1025-10 suitable for Home Assistant and Node-RED? Yes. The official Home Assistant guide and Node-RED guide make the R1025-10 a strong fit for automation and visualization projects. Does R1025-10 support BACnet and Modbus applications? Yes. The 3 isolated RS485 interfaces and the ecosystem around FUXA and FIN make it well suited to BACnet and Modbus oriented gateway and controller use cases. Should I choose R1025-10 or R1125-10? reComputer R1125-10 is better when you need more serial diversity, especially isolated RS232 plus RS485. R1025-10 is the better fit when 3 isolated RS485 is the priority and you want the simpler R1000 communication layout. Does R1025-10 support wireless expansion and security modules? Yes. It supports optional 4G LTE, LoRa, Zigbee, Wi-Fi/BLE, TPM 2.0, and SuperCAP UPS modules depending on the deployment requirements.
Related
Related
Related
Related