Semi-hollow PR Guitar Kit with F-holes Rosewood (Engineered) fretboard and beautiful trapezoid abalone inlays. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate (7/10) Straightforward wiring with few connections to solder, but the solid Maple Cap veneer is thin and easy to sand through, so use a light touch at the edges Adjustable bridge sets intonation quickly once the posts are seated Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Body Material: Mahogany (1 piece) Type: Semi-Hollow Chambered Sound Holes: 2 f-holes Internal Support: None (chambered body) Cutaway: Single Binding: None Top Veneer: Solid Carved Maple Cap Neck Material: Mahogany Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75" Binding: None Fretboard Material: Rosewood (Engineered) Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 1 Volume, 1 Tone, 3-Way Toggle Wiring: DIY (soldering required) Wiring Diagram: HH, 1 Volume, 1 Tone, 3-Way Switch Output Jack: Side jack Hardware Bridge: Adjustable Bridge + Stopbar Tuners: Chrome Sealed Pickguard: None Knobs: Black Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Semi-hollow guitar body with two f-holes and a carved top, unfinished Guitar neck with dark fretboard and abalone block inlays 6x chrome sealed tuners with bushings and washers 2x chrome-covered humbucker pickups in black mounting rings Pre-wired control harness with potentiometers 3-way toggle switch with black tip cap Chrome square output jack plate with jack Chrome stop bar tailpiece Adjustable bridge 2x tailpiece studs with knurled anchors 2x bridge posts with knurled anchors 2x black knurled knobs Black truss rod cover with screws Black control cavity cover 2x strap buttons with felt washers and screws Set of strings Black instrument cable Allen wrench Assorted chrome screws Hex nuts and washers What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
