The Sennheiser MD 445 Dynamic Vocal Microphone pushes the potential of dynamic microphones to the limits. Offering a direct and focused sound, the MD 445 gives every voice presence and intensity. Delivering sophisticated transparency and richness of low and middle ranges to create unparalleled acoustic closeness. What’s more, the MD 445 has been precisely tailored to suit modern stages and demanding productions. While an all-new highly developed aluminium-copper voice coil forms the basis for a direct and nuanced sound. A high-rejection super-cardioid microphone, the MD 445 systematically blocks out ambient noise. So you’re guaranteed the most protection from unwanted feedback Above all, the MD 445 is a high-end microphone that’s sure to take your sound to the next level! Dynamic vocal microphone Very lightweight, rapidly responding aluminium- copper voice coil High-resolution, direct sound for audibly greater proximity to the vocals Directionality: high-rejection supercardioid Extremely high feedback resistance Large diaphragm diameter Spring-mounted capsule to shield it from body-borne noise Hum compensation coil to eliminate electromagnetic interference Rugged metal design Frequency response (Microphone) 40 – 20,000 Hz Weight 329 g Nominal impedance 245 Ω Min. terminating impedance 1 kΩ Dynamic range 145 dB(A) Transducer principle (Microphone) dynamic Pick-up pattern high rejection supercardioid Sensitivity in free field, no load (1kHz) 1.6 mV/Pa -55.9 dBV/Pa Max. sound pressure level 163 dB Equivalent noise level 18 dB(A) Connector XLR-3m Dimensions Ø 47.5 x 174 mm