COLOR: White sequins and purple, yellow, green embroidery (fleur and tassels)SIZE: 10.75x10.5"TEMPERATURE: 300-310 Degrees FahrenheitPRE-PRESS: Lint roll surface of garment. Pre-press fabric (not transfer) for 7 seconds to remove wrinkles & moisture.TIME: 15-20 SecondsPRESSURE: Medium to high pressure with Teflon sheet or cloth to cover patch. For thicker fabrics, turn garment inside out and press area for an additional 10 seconds.HEAT PRESS IS REQUIRED. You must have even time, temp, and pressure. Do not use a home iron or Easy Press.WASH: Machine wash inside out on gentle cycle. Hang dry or machine dry on low to no heat. I hang dry mine. There's always a possibility of losing sequins, but if you machine wash inside out, on gentle then hang to dry, the possibility will be significantly lowered. **I have a 16x20" HPN heat press. Using a Teflon sheet to cover the sequins of the patch, I pressed it onto a CC ColorBlast T using high pressure at 300 degrees for 15 seconds. Adhesive backed patches are great for most fabrics and colors. They can easily be applied to cotton, polyester, &/or blends. Please test if you're using waterproof, water resistant, or fireproof garments. Please do not apply to items that will melt under high heat. Colors in pictures may vary due to different computer monitor settings. My suggested temps are just starting points. They may vary based on your heat press. I highly recommend a heat gun to check your heat press temperature. If you're unfamiliar with my transfers please consider ordering a test piece.I will not refund due to user error. Please calibrate and make sure your heat press has even temperature, time, & pressure needed for each transfer/patch. Artwork is the property of Greedy Stitches & may not be copied, shared, resold, or altered. Copyright @2020 Greedy Stitches.By placing your order with Greedy Stitches, you accept my terms of use and understand what you are ordering.
