Shell-Guard, Borate-Glycol Wood Preservative Shell-Guard provides the ultimate protection against insects and wood rot for your log home. This new generation of preservative combines the well-known effectiveness of borates with a glycol system that increases the penetration into the wood to enhance the action of the borate. Shell-Guard is colorless and odorless. The glycols used are the same type as those found in many food and skin care products. Shell-Guard is a concentrate that is mixed with an equal amount of water, then applied to bare wood with a brush or as a spray. Once in the wood, it will kill those insects that eat wood such as wood boring beetles and termites. It also kills the types of fungi that are responsible for rot and decay. Shell-Guard makes wood toxic to wood destroying organisms! The best thing about Shell-Guard is that one application will last the life of your home as long as the exterior surfaces are maintained with a quality, water resistant stain such as Lifeline. Product Information Shell-Guard provides the ultimate protection against insects and wood rot for your log home. Features A Preventative or Remedial Treatment Deep Penetrating EPA Registered Colorless Resource Links SDS 1-Gallon Product Label 2.5-Gallon Product Label Wood Finishes Application Guide Application Temperature 40° to 90°F Application Methods Low pressure sprayerBrushDrill holes and inject Surface Preparation Clean and dryBare woodFree of mold and mildew Special Instructions One coat applicationRinse surface before finishing Shelf Life 5 Years Frequency Permanent in wood that is kept sealed Drying Time 1-4 weeks, depending on weather conditionsRecommend 2 weeks, then wash lightly with Log WashSurface must be dry to the touch (free of residue) before finishing Coverage Rate 215 square feet / gallon concentrateActual coverage rate may be greater
