Product Description Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating, air conditioners, etc.) from anywhere. The UL-certified Shelly 1PM can control one electrical circuit of lights or appliances up to 16A remotely. Connect 110-240v AC or 24-60v DC and measure the power consumption of any appliance. Power metering Shelly 1PM has two integrated precise power meters that allow you to measure the consumption for each channel separately. Based on your monthly limit, it can execute different actions. Overconsumption and overheating protection Shelly 1PM has а built-in temperature sensor for overheating protection. If the PCB temperature goes above a danger level, the device will turn off. In case you want to control your consumption and spending, set your preferred daily/monthly energy use, and Shelly 2.5 will turn off the circuit immediately if it detects a higher value. Wide range of voltage support Shelly 1PM supports up to 110-240v AC or 24-60v DC, making it suitable for most types of Smart Home projects! Additionally, Shelly 1PM has an optional add-on for temperature, humidity, reed switch and other sensors. Hook your lights, washing machine, dryer, refrigerator, or any other old appliance that you want to control and measure remotely. Device identification Device name: Shelly 1PM Device model: SHSW-PM Device SSID: shelly1pm-XXXXXX Short descriptionShelly 1PM is a small form factor smart switch with power measurement, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system. It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.Shelly 1PM can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space.Shelly 1PM has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.Main applications Residential MDU (Multi Dwelling Units - apartments, condominiums, hotels, etc.) Light commercial (small office buildings, small retail/restaurant/gas station, etc.) Government/municipal University/college Integrations Google Samsung SmartThings Alexa Simplified internal schematicsOpens image in full screenOpen Device electrical interfacesInputs 1 switch/button input on screw terminal 3 power supply inputs on screw terminals: N (+), L, L1 Outputs 1 relay outputs with power measurement on screw terminal Addon interface Shelly proprietary serial interface Opens image in full screenOpen ⚠CAUTION! High voltage on the add-on interface when the Device is powered!Connectivity Wi-Fi Safety features Overheating protection Overpower protection Supported load types Resistive (incandescent bulbs, heating devices) Capacitive (capacitor banks, electronic equipment, motor start capacitors) Inductive with RC Snubber (LED light drivers, transformers, fans, refrigerators, air-conditioners) User interfaceUser interfaceInputs One (Reset) button Press and hold for 5 seconds to enable Device access point. Press and hold for 10 seconds to factory reset the Device. Outputs LED (Red) indication AP (Access Point) enabled and Wi-Fi disabled:1 second ON / ¼ second OFF Wi-Fi enabled, but not connected to a Wi-Fi network:2 second ON / ¼ seconds OFF Connected to a Wi-Fi network:Constantly ON Cloud enabled, but not connected:1 second ON /5 seconds OFF Connected to Shelly Cloud:Constantly ON OTA (Over the Air Update):½ sec ON / ½ second OFF Button pressed and held for 5 seconds:¼ second ON / ¼ second OFF Button presses and held for 510 seconds:⅛ second ON / ⅛ second OFF The list above starts with the initial device status and the lowest priority. Every next state cancels the previous one.SpecificationsEnlarges the table by opening it in a full screen dialogOpen Type Value Physical Size (HxWxD): 36x41x17 mm / 1.42x1.61x0.67 in Weight: Mounting: Wall console Screw terminals max torque: 0.4 Nm / 3.5 lbin Conductor cross section: 0.5 to 1.5 mm² / 20 to 16 AWG Conductor stripped length: 5 to 6 mm / 0.20 to 0.24 in Shell material: Plastic Color: Red Environmental Ambient temperature: -20 °C to 40 °C / -5 °F to 105 °F Humidity 30 % to 70 % RH Max. altitude 2000 m / 6562 ft Electrical Power supply: 110 - 240 VAC / 24 - 60 VDC Power consumption: < 1 W Output circuits ratings Max switching voltage AC: 250 V Max switching voltage DC: 60 V Max switching current AC: 16 A Max switching current DC: 10 A Sensors, meters Internal-temperature sensor: Yes Wattmeter (AC) Yes Radio RF band: 2401 - 2495 MHz Max. RF power:
Related
Related
Related
Related