Wolf Tooth Components ShiftMount Bicycle Brake Lever Parts ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura, or mount shifters directly to handlebars independent of brakes. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. Mount Type ShiftMount naming convention is [shifter type - brake type] MM-ISII is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC II brake MM-ISEV is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC EV brake ISEV-ISB is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC B brake ISEV-ISII is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC II brake MM-MAG is for a SRAM MatchMaker shifter mounting to a Magura brake ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake ISII- 22 Clamp is for a Shimano I-SPEC II shifter (SL-M9000-IR and SL-M8000-IR only) mounting directly to a 22 mm diameter mountain handlebar ISEV- 22 Clamp is for a Shimano I-SPEC EV shifter mounting directly to a 22 mm diameter mountain handlebar ISEV-31.8 Clamp is for a Shimano I-SPEC EV shifter mounting directly to a 31.8 mm diameter road handlebar MM-31.8 Clamp is for a SRAM MatchMaker shifter mounting directly to a 31.8 mm diameter road handlebar Compatibility Designed to work with rear (right side) brakes and shifters. Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters. MM-MAG: There will be a gap at the top of the clamp, which is the opposite of where the gap is with stock clamp. This is done to create a hard joint where the shifter is mounted. MM-ISEV is compatible with M9100, M9120, M8100, and M7100 Brakes. Deore M6100 or M4100 brakes will mount but the positioning not optimal so we would consider them not compatible. MM-ISEV, MM-ISII, & MM-MAG: while they will technically mount to a Sram AXS shifter pod, we do not recommend it. With SRAM AXS, the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders. Shimano I-SPEC A, Hope, and TRP brakes are not supported. Shimano I-SPEC EV to Magura brakes is not supported because of geometric challenges. ISII- 22 Clamp is compatible with Shimano XT M8000 and XTR M9000 shifters. NOT compatible with Shimano SLX M7000, Deore M6000. For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque. Mounting Type by Brake Model Shimano Brakes ISPEC-EV ISPEC-II ISPEC-A&B XTR M9100 XTR M9020 Saint M820 XT M8100 XTR M9000 XT M780 SLX M7100 XT M8000 SLX M670 SLX M7000 Deore M615 Deore M6000 XTR M980 XTR M95 Zee M640 Shimano model # can be found on the fluid resevoir SRAM Brakes MatchMaker X Not Compatible Guide RS Code R Guide T Guide R Code RSC Level Level TL G2 R Level T Level TLM G2 RS Level Ultimate G2 RSC Guide RE G2 Ultimate Guide T MAGURA Brakes All current models are compatible Tech Specs Weight: (Including hardware) MM-ISII • 10.5g | MM-ISEV • 9g | ISEV-ISB • 10g | ISEV-ISII • 6g | MM-MAG • 12g | ISEV-MM • 9.5g | ISII- 22 Clamp • 12.5g | ISEV- 22 Clamp • 10g | ISEV-31.8 Clamp • 16g | MM-31.8 Clamp • 17g Material: 6061-T6 aluminum .ShftMntImg {width: 20%; min-width: 200px;}
Related
Related
Related
Related