Spindle Mount Reducer ShimsAdapt a larger spindle mount to fit a smaller router or spindle body.These reducer shims are designed to fit inside compatible spindle mounts and reduce the clamping diameter so you can securely install a smaller router or spindle. They are especially useful when upgrading in stages—for example, using a 65mm trim router in an 80mm spindle mount while you save for a full spindle system.Available Sizes 80mm to 65mm – 42mm tall 69mm to 65mm – 25mm tall 69mm to 65mm – 75mm tall 89mm to 80mm – 44mm tall 108mm to 80mm – 44mm tall 80mm to 65mm – 90mm tall 86mm to 80mm – 60mm tall 89mm to 80mm – 65mm tall Common Uses Install a 65mm Makita-style trim router in an 80mm spindle mount Install a 65mm Carbide 3D router in a compatible larger mount Adapt 69mm, 80mm, 86mm, 89mm, or 108mm mounts to smaller motor diameters Reuse an existing mount while transitioning to a different router or spindle size CompatibilityThese shims were designed primarily around PwnCNC spindle mounts, but they may also work with other mounts that use the same nominal inside diameter and provide suitable clamping support.Measure before ordering. Confirm the inside diameter and usable clamp height of your mount, along with the outside diameter of your router or spindle body. Select the reducer size and height that best match your installation.Installation Notes Insert the shim fully into the spindle mount before installing the router or spindle. Make sure the shim sits evenly and does not overlap a split, bolt, or internal obstruction in the mount. Tighten the mount evenly and only enough to hold the motor securely. Do not overtighten, crush the shim, or deform the router or spindle body. Verify that the motor cannot rotate or slide before operating the machine. What’s IncludedOne spindle mount reducer shim in the selected size.
Related
Related
Related
Related