Shure SM7B Dynamic Vocal Microphone Broadcasting Bundle (Dynamite)

Performance Audio Verified independent store

→

Shure SM7B Broadcast Microphone with Dynamite Preamp, Studio Boom and Cable! Shure SM7B Vocal Microphone Shure's SM7B has been a mainstay in the professional audio industry for dec ades and is used regularly for radio broadcasts, voice over work, and vocals from rock to pop and everything in between. You can also use this mic on guitar cabs and snare drums if you're after a 'fatter' sound than what your typical dynamic microphone will allow. The SM7B is a professional utilitarian microphone at a staggeringly affordable price. Recording professionals across the globe turn to this mic for its reliable performance and complimentary tone. The SM7B dynamic microphone has a smooth, flat, wide-range frequency response appropriate for music and speech in all professional audio applications. It features excellent shielding against electromagnetic hum generated by computer monitors, neon lights, and other electrical devices. The SM7B has been updated from earlier models with an improved bracket design that offers greater stability. In addition to its standard windscreen, it also includes the A7WS windscreen for close-talk applications. SM7B Includes foam windscreen, close-talk windscreen, locking yoke mount. sE Electronics DM1 Dynamite Inline Preamp The DM1 DYNAMITE: explosive level for all your passive mics. Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier. Whether you're a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp - all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards. For optimum results, we recommend you plug the DM1 directly into your microphone's output. If necessary, a cable can be used between the microphone and the DM1 - but the shorter the cable, the better the overall performance will be. Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot) The RapcoHorizon 10 Foot XLR Male to XLR Female cable is made from a dual conductor 24 gauge copper cable utilizing a spiral copper shielding. In addition it features Neutrik NC3FXX and NC3MXX style Nickel connectors with the use of silver contact pins. This 10ft length is commonly recommended with any pro audio applications that will need a patch from one particular component to another one. It'll give you a tough and reliable connection all the while sustaining the purity of the audio signal. This series uses (2) 24 gauge bare copper center conductors and a serve shield for quiet operation. The outer jacket is a durable and flexible matte PVC compound. Available with alternate choices of connector brands to meet different preferences and price points. Available in black, blue, green, purple, red, and white. Neon colors available are neon blue, neon green, neon orange, neon pink, and neon yellow. Common lengths (in feet): 1, 2, 3, 6, 10, 15, 20, 25, 30, 50, 75, 100. Other lengths available upon request. Rode PSA1 Studio Boom Arm The PSA1 is a studio boom arm for radio, broadcast, studio and home use.It provides full 360 degree rotation. The PSA1 has a horizontal reach of 820mm, and a vertical reach of 840mm. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for verstile mounting in desks up to 55mm thick (clamp) or 70mm (insert). Designed for the Rode Procaster and Podcaster, the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount. Please note that the PSM1 shock mount is sold separately. Features: Shure SM7B Vocal Microphone Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors Internal "air suspension" shock isolation virtually eliminates mechanical noise transmission Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum coloration of off-axis sound Rugged construction and excellent cartridge protection for outstanding reliability Replacement cartridge: RPM106 sE Electronics DM1 Dynamite Inline Preamp +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD designed for neutral, balanced sound quality the perfect way to boost the signal of a passive microphone gain stays consistent regardless of connected load provides significantly improved level to your mic preamp for proper gain staging SOPHISTICATED CLASS-A ELECTRONICS state of the art electronics and high-grade FETs provide supremely low noise transformerless design for pristine sound quality provides the lowest noise in its class DEDICATED OUTPUT BUFFER AMPLIFIER provides +28dB output independent of load impedance or cable length extremely low output impedance drives long cable runs and can reduce susceptibility to RF interference, buzz & hum SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH efficient rejection of any electrical interference and noise high-quality finish ensures a great look for many years slim design allows for easy placement in the studio or on stage GOLD-PLATED XLR CONNECTOR for loss-free and reliable signal connection Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot) (2) 24 gauge center conductors Utilizing a serve shield process for quiet operation yielding maximum flexibility Matte jacket PVC material is very flexible yet durable with very low memory Pure copper conductor and shield Connector brand options available to meet various preferences and price points: RapcoHorizon, Amphenol, Neutrik, or Switchcraft Individually tested for performance and quality Rode PSA1 Studio Boom Arm Includes 3/8" adapter 32" (820mm) Horizontal Reach 33" (840mm) Vertical Reach Holds up to 4.4 lbs (2 kg) Includes two desk mounting options Dual-axis swivel mount for accurate positioning Specifications: Shure SM7B Vocal Microphone Type: Dynamic Frequency Response: 50 to 20,000 Hz Polar Pattern: Cardioid (unidirectional) Impedance: Microphone impedance rating is 150 ohms (150 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms. Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3. Output Level (at 1,000 Hz): Open Circuit Voltage*: -59.0 dB (1.12 mV) *0 dB = 1 volt per Pascal Electromagnetic Hum Sensitivity (Typical, Equivalent SPL/milliOersted): 60 Hz: 11 dB 500 Hz: 24 dB 1 kHz: 33 dB Switches: Bass rolloff and mid-range emphasis: Slotted response selector switches. See Figure 3 in User Guide for bass rolloff and mid-range emphasis (presence boost) response. Cartridge Shock Mount: Internal air-suspension shock and vibration isolator. Microphone Connector: Three-pin professional audio (XLR) Swivel Assembly: Integrated, captive nut for ease of attachment to stand, fits 5/8 in.-27 thread. Case: Dark gray enamel aluminum and steel case with dark gray foam windscreen. Dimensions: See User Guide Net Weight: 765.4 grams (1 lb, 11 oz) sE Electronics DM1 Dynamite Inline Preamp Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB) Gain: 28 dB (load 1kOhms) Max output level (0.5% THD): 8.3 dBV (2.6 V) Output noise level: 9 μV (JIS-A) Powering: 48 Volts according toIEC 61938 Electrical impedance: 135 Ohms Recommended load impedance: >1k Ohms Current consumption: 3.0 mA Connectivity: 3-pin male/female XLR connector Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.) Weight: 80 g (2.82 oz.) Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot) Cable: MIC1.K Conductor Gauge: (2)24 gauge Shield: Bare annealed copper serve Shield Coverage: 95% Jacket: Matte PVC O.D.: 0.230" Capacitance: 21 pF/ft. @ 1 kHz Cond.-Shield Capacitance: 37 pF/ft. @ 1 kHz Characteristic Impedance: 70Ω NOMINAL D.C. Resistance @ 20°C: 23Ω/1000' Includes: (1) Shure SM7B Vocal Microphone (1) sE Electronics DM1 Dynamite Inline Preamp (1) Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot) (1) Rode PSA1 Studio Boom Arm Show more