Cetol Filter 7 is a highly durable, medium build, solvent-borne woodstain that provides a highly translucent, satin finish and offers outstanding protection from the damaging effects of sunlight. Highly translucent to bring out the beauty of woodgrain, 5 year maintenance cycle, Excellent resistance to UV radiation, Microporous and water-repellent and very easy application and maintenance. Available in 1 litre, 2.5 litre or 5 litre sizes, 4 different colours available subject to stock. Please contact our team to check colour/size stock. Highly translucent to bring out the beauty of woodgrain 5 year maintenance cycle Excellent resistance to UV radiation Microporous and water-repellent Very easy application and maintenance Technical information Product Type Wood Stain Short Description A highly durable, medium build, solvent-borne woodstain that provides a highly translucent, satin finish and offers outstanding protection from the damaging effects of sunlight. Drying time (recoat) 16 hours Drying time (touch dry) 3 hours Suitable Surface Wood, Doors, Windows, Shutter , Door frames, Window frames Coverage 16 m²/L General No. of Coats 2 Application description Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced. Cetol Filter 7 plus is supplied ready for use. Do not thin. Cetol HLS plus should be used as a basestain for joinery items prior to coating with Cetol Filter 7 plus. For best results use a good quality, long-haired soft bristle brush.The product should be applied in a full flowing coat, laying off in the direction of the grain, using the minimum number of brushstrokes necessary to produce an acceptable finish. Avoid overbrushing, as this will reduce the protection afforded. Applyto a minimum wet film thickness of 55 micrometres. Conditions - Do not apply if there is a risk of rain, or when air/substrate temperatures are below 5ºC or above 30ºC during application or drying periods. Protect from frost and rain until dry.Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.Two coats of Cetol Filter 7 plus should be applied, allowing a minimum of 16 hours drying time between coats. On new work, where practical, the first coat should be applied all round prior to fixing. Pay special attention to any areas of exposed end grain,tops and bottoms of doors, and undersides of cills. The second coat should be applied to all exposed surfaces, as soon as possible after the first coat has dried, but no sooner than 16 hours. Cleaning Clean brushes and equipment with brush cleaner immediately after use. If spilled, Cetol Filter 7 plus may be removed immediately while still wet,using white spirit Storage Store in cool, dry, frost-free conditions
