AG40% Silver Solder Brazing Rods40% silver content brazing rods from Lawton Tubes, supplied in 500mm lengths. A premium brazing alloy delivering outstanding flow, strength, and ductility. Ideal for critical HVAC, refrigeration, and industrial joints where maximum performance and reliability are required.Key Features 40% silver content — premium high-strength brazing alloy 500mm rod length — standard trade length Superior flow and wetting on copper, brass, and steel Produces exceptionally strong, leak-free joints for high-pressure refrigeration systems Suitable for tight clearance joints and complex assemblies Preferred for critical applications requiring maximum joint integrity How to Braze Copper Fittings Cut tube square using a pipe cutter or fine hacksaw (32 TPI). Remove burr with file or scraper. Clean outside of copper tube thoroughly with sand cloth or sandpaper to the depth of the fitting. Leave no dark spots. Clean inside of fitting carefully to tube stop with a wire brush. Sand cloth or sandpaper may also be used. Apply heat uniformly around the fitting with a torch. When the brazing rod melts on contact with the heated fitting, the correct brazing temperature has been reached. Remove flame and feed rod to the joint at one or two points until a ring of brazing alloy appears at the end of the fitting. Note: Always work in a well-ventilated area and follow appropriate safety precautions when brazing.
