The Sim-Lab GT1 EVO Front Mount is the front wheelbase bracket for the GT1 EVO cockpit, built from a 15 mm black-coated aluminum plate with 10 mm side plates. It is the mounting solution for running a high-torque direct drive base on a GT1 EVO without any flex in the front of the rig. Thick plate, no flex A direct drive wheelbase is only as good as what it is bolted to. A thin or under-braced front mount lets the base twist under load, and that twist shows up in your hands as vague, delayed feedback. This bracket uses a 15 mm face plate with 10 mm side plates and 500 mm of width across the assembly, so torque goes into the chassis instead of into deflection. Supported wheelbases and servos Sim-Lab DDS26 TorqueSync™ Sim-Lab DDS39 TorqueSync™ MiGe 130ST series Bodnar SimSteering Kollmorgen AKM Series 5X Lenze MCS12H Fanatec CSW v1, v2 and v2.5 (spacers and bolts included) Simucube 2 Sport, Pro and Ultimate Simagic Alpha and Alpha Mini VRS DFP15 VRS DFP20 and uDFP20 What is included Front mount bracket assembly, 500 mm width Side brackets and connector brackets All required hardware: bolts and slot nuts Specifications Material: 15 mm black-coated aluminum plate, 10 mm side plates Width: 500 mm assembly Cockpit compatibility: Sim-Lab GT1 EVO Before you order Two fitment notes from Sim-Lab: the dashboard bracket is not intended for use with the Fanatec CSL wheel, and the EVO front mount cannot be used in combination with the GT1 EVO single screen holder. Who this is for This is the bracket for GT1 EVO owners stepping up to a serious direct drive base. Running a P1X instead? Look at the P1X Pro front mount. See the full range of chassis accessories and Sim-Lab cockpits. Shipped from the US by Velocity Pro Sims. Not sure your wheelbase is on the list? Get in touch and we will confirm before you order.
