Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi 4G/3G/2G GNSS is a Raspberry Pi and Jetson compatible 4G HAT built around the SIM7600G-H-M.2 module. It supports LTE Cat-4, global multi-band 4G/3G/2G communication, and GNSS positioning, making it a strong fit for remote monitoring, industrial communication, cloud-connected terminals, mobile IoT, field data systems, and GNSS-enabled embedded projects. This HAT connects to Raspberry Pi, Jetson Nano, PCs, and similar hosts through USB 3.1 (USB 2.0 compatible) and also exposes control functions through UART, power control, and reset pins. It supports a wide range of communication functions including dial-up, SMS, phone call, TCP, UDP, MQTT, HTTP, HTTPS, FTP, and FTPS, making it suitable for both data communication and full cellular modem development. Important: According to the module manufacturer, this product cannot be shipped and technical support cannot be provided to Iran, North Korea, Cuba, Sudan, and Syria. Features SIM7600G-H-M.2 module with global multi-band 4G / 3G / 2G support. LTE Cat-4 with up to 150Mbps downlink / 50Mbps uplink. GNSS positioning supporting GPS, BeiDou, GLONASS, Galileo, QZSS, and LBS. USB 3.1 port (USB 2.0 compatible) for Raspberry Pi, Jetson Nano, and PC connectivity. Onboard UART, PWR, and RST control pins with voltage level translation via DIP switches. USB-C connector for external module power, allowing more stable high-load operation. Audio jack and audio decoder for phone call and audio-related functions. Standard M.2 B KEY slot with compatibility across several 4G / 5G M.2 modules. Specifications Module SIM7600G-H-M.2 Cellular Class LTE Cat-4 LTE-FDD B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD B34, B38, B39, B40, B41 3G UMTS/HSDPA/HSPA+ B1, B2, B4, B5, B6, B8, B19 2G GSM/GPRS/EDGE 850 / 900 / 1800 / 1900MHz GNSS GPS, BeiDou, GLONASS, Galileo, QZSS GNSS Sensitivity -159 dBm GPS / -158 dBm GLONASS / cold start -148 dBm GNSS TTFF Cold start less than 35s, hot start less than 1s Interfaces USB 3.1, UART, Raspberry Pi GPIO header, audio jack Functions Dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S) SMS MT, MO, CB, Text, PDU Audio Echo cancellation, noise reduction Power USB power or external USB-C power, up to 3A output current Applications Remote monitoring and telemetry over cellular networks. Cloud communication terminals using MQTT, HTTP, and TCP/UDP protocols. GNSS-enabled field data systems and location-aware embedded devices. Industrial IoT and edge communication gateways. Raspberry Pi and Jetson cellular connectivity for mobile deployments. Phone call and SMS automation based on AT command workflows. Packing List M.2 TO 4G/5G HAT x1 SIM7600G-H-M.2 x1 Antenna 2pcs x1 IPEX adapter cable 2pcs x1 2 x 20PIN pin header x1 Passive GPS antenna x1 Dual plug USB3.0 cable x1 USB3.0 adapter x1 USB2.0 adapter x1 SMA protective cap 2pcs x1 Screws pack x1 Other Content Why this HAT stands outThis board is more than a simple USB modem breakout. It combines a standard M.2 B KEY slot, Raspberry Pi GPIO stacking design, USB connectivity, UART control, and audio support, making it suitable for full modem development rather than only basic network access. Best-fit host platformsThis HAT is especially practical for Raspberry Pi 4B / 3B+, CM4-IO-BASE-A/B, Jetson Nano, Windows PCs, Ubuntu systems, Raspberry Pi OS, and OpenWRT-based setups where you need high-speed mobile networking plus GNSS. GNSS and communication in one boardBecause it combines cellular data, phone call and SMS support, and GNSS positioning, this board is ideal for field systems that need both remote communication and location information without adding multiple separate modules. Resources Waveshare Wiki Jetson Orin Wiki Schematic PDF Driver Package SSCOM Tool SIM7600G-H Datasheet FAQ What is this HAT best used for? It is especially suitable for Raspberry Pi and Jetson cellular networking, GNSS-enabled field systems, industrial IoT, remote telemetry, cloud communication, and SMS / phone-call capable embedded projects. Does it support GNSS positioning? Yes. It supports GPS, BeiDou, GLONASS, Galileo, QZSS, and LBS base station positioning. Can it be used with Raspberry Pi and Jetson? Yes. It is designed for Raspberry Pi series, CM4 IO boards, Jetson Nano, and PCs. What is included in the package? The package includes the M.2 TO 4G/5G HAT, SIM7600G-H-M.2 module, antennas, cables, pin header, passive GPS antenna, adapters, protective caps, and screws pack.
