Av Cover, Wall Red Fire Key Features Multi-candela xenon strobe with synchronized 1 Hz flash rate and with intensity programmable from the control panel or jumper selected as 15, 75, WP 75, or WP 185 cd Advanced addressable notification controlled by IDNAC SLCs providing regulated 29 VDC allowing strobes to operate with lower current even under battery backup Wiring supervision to each appliance allowing “T-tapped” connections for Class B circuits to simplify wiring (Class A circuits require in/out wiring) Self-Test Mode allows on-board sensors to detect the strobe and horn output and then report their status to the control panel TrueAlert Device Reports at the control panel detailing appliance point ID, custom label, type, and candela setting (see sample on page 3) Magnet Test diagnostics to assist checkout and testing of appliances and wiring Appliance LED can be selected to display each polling cycle to indicate appliance supervision When the controller is in diagnostic mode, the Magnet Test pulses the LED to indicate appliance address and can be set to also briefly flash the strobe and sound the Documents & Downloads Wall Mount Weatherproof Visible and Audible/Visible Notification Appliances (Datasheet) Appliance Cover Selection Reference (Datasheet) Audible/Visible Notification Appliances, Wall Mount Multi-Candela Horn/Strobe, Model Series 49AV (Datasheet) Audible/Visible Notification Appliances; Multi-Tone Horn/Strobe with 520 Hz Output (Datasheet)
