The new AP70 Mk2 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels. Replacing both the AP70 and AP80 as our IMO/SOLAS autopilot controller, the AP70 Mk2 retains much of the well-reputed platform of its predecessors, but with a brilliant new display and modernised software interface. The AP70 Mk2 will accommodate installations with up to six drives. Previously only available with the AP80, this premium feature is now a standard in the AP70 Mk2. Engineered for responsiveness, robustness and ease of use, the AP70Mk2 pairs a precision rotary control dial with dedicated buttons for instant access to steering modes, several custom-configurable work modes and multiple rudder/thruster integration. Wheelmarked for use on SOLAS vessels The AP70 Mk2 builds on, and continues the legacy of the SIMRAD Pro autopilot product portfolio. Its performance, robustness and quality are proven and recognised with the wheelmark symbol, making it suitable for all vessels ranging from small work- boats to large tankers. Advanced configuration and tuning options to suit all ships Parameters ranges and tuning options to support vessel dynamics. Adjustable for all weather conditions, hull types, work situations. Suitable for retro-fit on old ships as well as modern new-builds. Compatible with all common rudder/drive types Water jet, Azi-pods, Voith-Schneider, Rudder, outboard. Control signals to control, hydraulic pumps, solenoids, analog current/voltage, control/handshake signals. Up to 6 rudders/thrusters integration Dual rudders, fore and aft thrusters supports large and complex installations and redundancy. Heavy-duty rudder feedback support Simrad heavy-duty rudder feedbacks are supported. Configurable Work Mode and Low/High Speed Modes Autopilot settings can be tuned for optimal performance in separate low-speed, high-speed, and Work modes. The user-configurable Work mode allows the autopilot system to be configured for optimal response in a specific situation, such as a fully laden vessel, configurable thruster usage. No Drift Steering No Drift mode integrates GPS navigation with auto-steering, using position data to counteract the effects of wind and tide. This allows the AP70 Mk2 to maintain a straight track over ground on the current course, without the need to manually set a waypoint or route. Navigation steering, route following Navigation steering controls the ship on a pre-planned route from a Simrad MFD, Simrad ECDIS or third party MFD and ECDIS. Command transfer and multiple control stations support Command transfer is a mechanism useful in multi-controller installations. It enables the officer on watch to allow, deny the transfer of autopilot control to control devices such as a secondary AP70 Mk2 or a remote controller on a bridge wing station, above deck, or aft bridge depending on the work scenario. The AP70 Mk2 can also be used in an open configuration, where control flow is unrestricted. Product Details Wheelmarked for use on board SOLAS vessels (IMO, MED-B) Advanced configuration and tuning options to suit all ships Compatible with all common rudder/drive types Up to 6 rudders/thrusters integration Heavy-duty rudder feedback support Configurable work modes and low/high speed modes No Drift steering holds course against wind and tide Navigation steering, route following Command transfer and multiple control stations support Product Specifications Approvals Compliance MED-B-7837-DNV, MED-B-7918-DNV, MED-D-Navigation Equipment Type Approval HCS, HSC, Wheelmark, US Coastguard, CCS, and RMRS approved depending on autopilot computer Autopilot Compass sensor support NMEA2000, NMEA0183 Engine Drive systems integration Reversible pump, Solenoid valve on/off, Proportional valve, Analog, CAN (SG05Pro) Manouevres / Turn Patterns U-turn, S-turn Rudder sensor support RF300, RF45X, RF25N, RF70, RF14XU Steering Modes Non Follow Up (NFU), Follow Up (FU), Auto, NoDrift, Nav Compliance IMO Certified yes Connectivity NMEA2000 Pgns See SI80 Signal Interface NMEA 2000 1x CAN Micro-C port, 1 LEN PC Connectivity 1 x Ethernet port Display Backlight Color White/Red Resolution 480 X 480 Size and Type 5 in127mm, 16-bit color TFT Viewing Angles 170° viewing angle Electrical Power Consumption, max. 0.7A At 12V, 0.4A at 24V Power Consumption, typical 0,7/0,4 A At 12V DC, 0,4/0,3 A at 24 V DC backlight full/off Recommended Fuse Rating 2A Supply Voltage 12/24VDC +30 -10% Environment Operating Temperature Range -30C To +55C (-22F to +131F) Storage Temperature Range -25C To +70C (-13F to +158F) Waterproof rating Exposed IPx6 MFD Compass Safe Distance - Metric, imperial 0,4m (15,75") Physical Dimensions (W x H x D) 253 X 144 X 54mm (9,92 X 5,67 X 2,13 ") Mounting Type Flush, bracket Weight 1,4 kg (3,1 lbs) Other Warranty Period 2 years Interface Keypad and rotary dial Languages English(US), English(UK), Danish, German, Spanish, Finnish, French, Greek, Icelandic, Italian, Dutch, Norwegian, Portuguese, Brazilian Portuguese, Swedish, Afrikaans, Japanese, Korean, Simplified Chinese, Traditional Chinese, Bulgarian, Hebrew, Hungarian, Slovak, Russian, Ukrainian
Related
Related
Related
Related