Single Flexible Ale Extractor for Upright Cask Dispense Serve real ale from an upright cask with the Single Flexible Ale Extractor. Designed to supply one beer engine or handpull, this cask ale float system provides a practical way to dispense cask-conditioned beer without a conventional horizontal racking system. The flexible silicone tube and floating inlet draw beer from just below the surface, helping to keep settled sediment out of the beer line. It is suitable for pubs, taprooms and event bars looking to simplify cask handling and serve clearer beer. Key Features Single outlet: Connect one compatible beer engine or handpull to your cask. Upright dispense: Keep the cask standing upright during service. Floating inlet: Follows the beer level down, drawing from just below the surface. Flexible silicone tube: Available in lengths to suit different cask sizes. Low maintenance: Straightforward operation with less cask handling. Hop filter included: Supplied as part of the extractor kit. Ale Extractor Indicator line: Included as standard. Cask breather compatibility: Can be used with compatible auto-vents and cask breathers. How the Cask Ale Float System Works The extractor passes through the fitted body into the cask. Inside, the float holds the tube inlet beneath the beer’s surface and moves down as the cask empties. This allows beer to be drawn from above the settled sediment, helping to maintain clarity during dispense. Correct tube length is essential for the float to operate properly. What’s Included? Each Single Flexible Ale Extractor kit contains: 1 × ale extractor body with blanking plug 1 × complete single outlet assembly 1 × silicone tube in the selected cask size 1 × ale extractor float 1 × single hop filter 1 × 1/2" tail 1 × nut One extractor body is included as standard. An additional body can be selected for easier cask changes. Choose Your Thread and Cask Size Select the configuration that matches your cask and existing dispense fittings: Thread options: 3/4" BSP, L Thread or Y Thread Cask sizes: Pin, Firkin or Kilderkin Extra body: Choose with or without an additional extractor body Check the required outlet thread and cask size before ordering. Choosing the correct tube length allows the floating inlet to move as intended throughout dispense. Prepare Your Next Cask in Advance A spare extractor body, also known as a collar or broach, allows you to tap and prepare the next cask before the current one is empty. At changeover, transfer the extractor into the prepared cask. This helps reduce delays when changing casks during service. Installation and Care The required washers and hop filter must be correctly fitted for efficient operation. Clean the extractor as part of your regular cask dispense cleaning routine. For guidance, watch the videos on tapping and venting and installing a flexible ale extractor. Select your thread, cask size and extra body option before adding to your basket. For help choosing the correct configuration, contact [email protected]. Watch our installation video for guidance on tapping and venting. Ideal for anyone looking for an efficient, reliable way to dispense cask ale while maintaining quality and reducing wait time. How to install a flexible ale extractor Allows upright dispense Low maintenance Float stays submerged Save approximately 2 pints per barrel Hop Filter included Handy 'Ale Extractor Indicator' line Can also be used with our auto-vents/cask breather
