The Single stage regulator with adjustable pressure will reduce the high pressure of a CO2 cylinder to a lower and usable pressure. The ability to adjust the working/output pressure ensures the regulator will be able to meet the needs of any homebrew enthusiast. Comes with 8mm barbed spigot output for easy tube connection. High quality design and manufacture. Adjustable output / working pressure. 8mm barbed spigot output. Dual pressure gauges indicating cylinder pressure and output working pressure. Industry standard nut, compatible with DIN 477 / BS 341 No. 8 / JIS m22-14 / W21.8-14 / .860" x 1/14 (covers UK, Europe and Asia). Instructions Tighten the regulator to your CO2 cylinder using a spanner or wrench. Do not use your hands to tighten, it will not create sufficient seal and be likely to leak. Set the output pressure to minimum by turning the pressure adjuster knob fully anticlockwise. Close the needle valve by turning fully clockwise. Open the flow of gas from your CO2 cylinder. The cylinder pressure gauge will now indicate the pressure of the cylinder. Turn the pressure adjuster clockwise until your desired output pressure is set.
