SIRUI 1.25x Anamorphic Adapter - One Adapter, Numberous Anamorphic Lenses! The SIRUI 1.25x anamorphic adapter is designed to turn any spherical lens into an anamorphic or increase the squeeze ratio of anamorphic lenses. This is a super budget-friendly anamorphic solution that will bring you tons of fun! Why is the 1.25x? The 1.25x is one of the most classic squeeze factors used by popular anamorphic lenses like Panavision. In addition to creating a 25% increase in the horizontal field of view, the 1.25x squeeze has two other advantages. 2x Constant Squeeze Screw the SIRUI 1.25x adapter onto the 1.6x anamorphic to achieve a 2x squeeze. With a higher squeeze comes more noticeable anamorphic characteristics, for example, the thinner bokeh and shallower depth of field. The 2x squeeze allows more information to be included into the frame, giving vou more flexibility to reframe in post. Flexible Reframing Compared to traditional 2x anamorphic lenses, this combination is reasonably compact and affordable, offering the best value for your money. Approx. 16:9 Common Aspect Ratio Most professional digital cameras, such as ARRI, use 4:3 sensors. When a1.25x anamorphic adapter is used on these cameras, the image can be directly desqueezed to an approx. 16:9 aspect ratio, which is a universal format for modern commercials, TVCS, etc. Using the 1.25x adapter on spherical lenses and shooting 16:9 will result in a 20:9 aspect ratio, which allows you to play videos in full screen on smartphones Wide Compatibility The 1.25x adapter has an 82mm rear thread. Three step-down rings (67mm, 72mm, 77mm) and a step-up ring (92mm) are available to match a wide array of popular lenses on the market. Compact & Portable With a length of only 46.5mm and a weight of 650g, the adapter is relatively small and lightweight. Front Single Focus Set the base lens at infinity and use only the adapter to focus. Constant Squeeze Ratio The adapter maintains a constant 1.25x squeeze ratio at all focusing points, eliminating the "anamorphic mumps" effect on your talent. Super Easy To Use Screw the adapter onto the base lens. Make sure the logo and the button face straightly upwards. Set the base lens and the adapter at infinity and use only the adapter to focus. Fine-tune the focus ring of the base lens if the subject is not in focus. If the lens flares do not appear horizontal, you can overlay the gridlines on the camera screen, push the button, and fine-tune the adapter until the flares become horizontal. Rotate the adapter to remove it (Do not push the button). *A stepping ring should be attached to the front of the base lens if the lens doesn't have an 82mm filter thread.
