Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Application instructions (home iron) • Set iron dial between Cotton and Linen• Cover design with Kraft paper or non-stick cover sheet• Place on flat, hard surface (ironing board not recommended)• Press iron with medium/firm pressure (do not slide iron)• Press each section of design for 10-15 seconds• If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds• Peel carrier hot or cold Application Instructions (heat press)• Cut in reverse• Weed excess material• Preheat garment for 2-3 seconds• Apply design at 305°F/150°C• Use medium pressure for 10-15 seconds• Peel carrier hot or cold Laundering: Wait 24 hours before 1st washMachine wash warm or cold / mild detergentDry on normal dryer settingDo not dry clean Cricut: Blade: StandardSetting: Iron-on Silhouette Cameo: Blade: Standard, 3Material: Heat Transfer, SmoothSpeed: 8Force: 6 Scan N Cut: Blade: Standard, 2Cut Speed: 1Cut Pressure: 1 Roland GS/GX-24: Blade: 45°Gram Force: 80-90Offset: .250Speed: 25-50 cm/s Graphtec: Blade: 45°Gram Force: 8-9Tool: CB09U+0Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60°Gram Force: 80-85Speed: 300mm/s*Blade Advancing Varies Titan 2 & 3: Blade: 45°/60°Gram Force: 60-65Speed: 300mm/s*Blade Advancing Varies
