A professional outdoor surface for a measured ramp planThis 4-by-8-foot Skatelite Pro panel gives a wooden ramp a professional-grade paper-composite final riding surface in Natural Wood Tan. The sheet is one quarter inch thick and designed for outdoor use, so the important decisions are the exact panel count, seam layout, cuts, and whether OC Ramps is preparing it for one of its kits.A professional-grade final riding surfaceSkatelite Pro is a professional-grade paper composite used as the final riding surface on ramps. Its Natural Wood Tan finish and 1/4-inch panel construction make it a surface choice for an outdoor ramp project, not a replacement for structural plywood or a generic paint coating.One quarter inch thick and four by eight feetEach Skatelite Pro panel measures 4 feet by 8 feet and is one quarter inch thick. Use those exact measurements to plan seams, cuts, and quantity; the product dimensions do not replace a measured layout of the ramp being surfaced.Natural Wood Tan for the finished surfaceNatural Wood Tan is the specified finish for this Skatelite panel. Treat the color as part of the finished look while keeping the more important product decision grounded in the paper-composite material, outdoor use, and fit with the measured ramp plan.Pre-drill service is limited to OC Ramps kitsThe pre-drilled, pre-countersunk, and cut-to-size option is available only for panels prepared for OC Ramps kits. Loose-sheet buyers should choose the standard panel and use the construction plan for their own ramp to locate every cut and fastener from the actual layout.Count sheets from the surface, not the footprintOne product quantity equals one nominal 4-by-8-foot Skatelite Pro sheet. Measure the riding surface, map seams and cuts, then calculate quantity from that exact plan. A universal panel count would be misleading because ramp shapes, decks, and transition layouts differ.What's in the BoxOne 4-by-8-foot, quarter-inch Natural Wood Tan Skatelite Pro panel in the selected prep configurationConfirm surface-sheet shippingOC Ramps will confirm the shipping cost for the exact sheet quantity and order configuration. Standalone and bundled surface-sheet terms must not be inferred from the sitewide shipping message.Freight deliveryThis product ships by freight. OC Ramps will confirm delivery timing and the receiving requirements for the exact order. Inspect the shipment when it arrives and report visible damage promptly.Install from the exact ramp planOne quantity is one panel. Use the 4-by-8-foot, quarter-inch Natural Wood Tan Skatelite Pro panel and the ramp's measured surface to determine seams, cuts, fasteners, and total quantity before installation.Questions about 4 x 8 Skatelite Pro Ramp Surface PanelHow is Skatelite Pro different from Skate Paint?Skatelite Pro is a physical quarter-inch panel installed as the final riding surface. Skate Paint is a clear coating rolled onto real wood. Compare the ramp plan, desired riding layer, seams, cuts, budget, and maintenance approach before choosing. A sheet and a liquid coating do not solve the same construction job.Can Skatelite Pro be cleaned after wax, pad scuffs, or graffiti?Yes. The material is easy to clean, including stubborn graffiti, pad scuffs, and wax. Use appropriate care for the installed ramp and address buildup before it changes the riding surface as opposed to treating a durable panel as something that never needs attention.Which action sports can use this Skatelite Pro surface?The surface is intended for skateboards, scooters, BMX bikes, and roller skates. That makes it useful for a shared action-sports ramp, though each discipline still needs appropriate site planning, protective equipment, and a ramp layout that fits the riders using it.How is a Skatelite Pro panel used?Skatelite Pro is installed as the final riding surface on a compatible skate ramp. Match the sheet count, thickness, and cut plan to the exact project, then protect any plywood that remains exposed rather than applying Skate Paint over the Skatelite surface.Can I return the 4 x 8 Skatelite Pro Ramp Surface Panel if it is not the right fit?Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.ramp surfaces.Review the OC Ramps Return Policy.
