Item Name: Skull Blasting Stencils SKU: AS-SKULLS Description: Skull Blasting Stencils are single-use vinyl resist stencils designed for abrasive blasting on glass and other smooth surfaces. Each stencil sheet uses a water based adhesive that holds the pattern in place during blasting, then releases cleanly with a simple water soak for easy removal. The skull design features sharp-edged artwork intended to produce crisp, high-contrast etched imagery when used with sandblasting equipment. The stencils include an instructional sheet, and there is a three sheet minimum purchase requirement that can be met by mixing designs. How it is used: Clean and dry the glass surface so the stencil adhesive bonds evenly Apply the vinyl stencil to the glass and press firmly to seal edges and prevent blast media from creeping under the pattern Abrasive blast the exposed glass areas to create an etched skull design with sharp edges Remove the stencil by soaking the piece in water until the adhesive releases and the vinyl lifts away Rinse and dry the piece, then continue with additional finishing such as polishing or coldworking if desired Dimensions: Sheet size: 8.5" by 12" Approximate margin: 5/8" bottom and top Large images: about 1" to 1.5" in height and about 3/4" to 1.5" wide
