Build one controller into several types of constant-voltage LED tape system with the Skydance WT5. Its selectable modes cover single-colour dimming, CCT, RGB, RGBW and RGB+CCT, while Tuya Smart provides app control on a 2.4GHz Wi-Fi network.Two wireless control routesWT5 can be operated through Tuya Wi-Fi or paired with a compatible Skydance 2.4GHz RF remote. A remote is not included. Set the required output mode before wiring and use only the terminal arrangement shown for that LED type; this listing is WT5, not V5-L(WT).Key specifications 12–24V DC constant-voltage PWM controller DIM, CCT, RGB, RGBW and RGB+CCT modes Five outputs at 3A each; 15A maximum total Tuya Smart over 2.4GHz Wi-Fi Compatible Skydance 2.4GHz RF remote support Reverse-polarity, overheat and short-circuit protection Dimensions: 114 × 38 × 20mm Power and installationThe box contains the WT5 controller only; LED tape, power supply and remote are separate. Choose a DC supply matching the LED voltage and total load, isolate it before wiring, verify polarity and observe all channel limits. Never connect the controller or low-voltage LEDs directly to 220–240V AC mains. Complete setup in line with the manufacturer instructions.Download the WT5 setup and wiring manual (PDF).
