Skystars RC flagship H743 Flight Controller with X8 support, OSD, BMI270 gyro, BMP280 barometer, 16M blackbox, 8 UARTS, and more. The powerful MCU running at 480MHz should future-proof any new firmware updates coming in the next few years. Specifications: (gyro, baro may change depending on availability) MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash Gyro: BMI270 Baro: BMP280 OSD: AT7456E Blackbox: 16M 8x Uarts (1,2,3,4,6,7,8) with built-in inversion. 8x PWM outputs 1x I2C 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) USB Type-C(USB2.0) 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr) 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V) Dual Camera Inputs switch VTX 10V/Vbat filtered power ON/OFF switch DJI FPV OSD is supported by any spare UART Vbat Input: 7~25V (2~6S LiPo) BEC: 5V 2A Continuous (Max 3A) LDO 3.3V: Max 250mA Firmware: Betaflight - SKYSTARSH7HD Mounting: 30.5 x 30.5mm Dimensions: 39.5 x 39.5 x 7.8 mm Weight: 10.1g Includes:1x Skystars RC H7 30x30 Flight Controller4x Vibration Dampening Grommets2x JST-SH1.0_8pin cable1x JST-GH-6P cable for DJI port
