Filmmakers no longer need to sacrifice F-stops for color-mixing technology. The DMG SL1 is a slim-profile, ultra-bright soft light that provides superior, full-spectrum color rendering for set lighting. The ultra-thin, lightweight fixture features a powerful array of emitters that can produce virtually any color desired, and white light that looks fantastic on skin tones. Note: This fixture requires a driver and power supply to operate – sold separately. MIX® Technology Rosco’s patented MIX technology features six LEDs: Red + Lime + Green + Blue + Amber + White. This proprietary blend of emitters enables DMG SL1 fixtures to produce a wider gamut of colors than comparable RGBW/RGBA fixtures. The red, lime, and amber LEDs have also been phosphor-converted. This process not only fills in the spectral gaps found in other color mixing lights, it also optimizes the fixture’s output to better match the sensors of digital cameras. Enhanced Skin Tones Rosco’s MIX technology enables DMG fixtures to generate a full-spectrum white light with a 1700K – 10,000K color temperature range. When lighting talent with a DMG SL1, filmmakers will notice enhanced skin tone reflectance because the unique, phosphor-converted MIX® LEDs produce more of the wavelengths found in all human skin tones. True Rosco Color™ The wider color gamut created by Rosco’s MIX technology also enables the DMG SL1 to create over 130 True Rosco Color™ gel matches. These colors have been verified – by eye, by meter, and by camera – to match traditional tungsten and daylight sources with Rosco gels on them. Multiple Control Options Set lighting technicians know that speed is of the essence when the cameras are rolling. There are no complicated menus on the DMG SL1. Simply choose between five different modes: White Mode, Color Mode, Gel Mode, Effects Mode and Source Match Mode – then adjust the settings of the light as needed. All of these features are available using the fixture’s Driver accessory (sold separately) or via the free myMIX app from a mobile device. The DMG SL1 is also RDM compatible and can be controlled via wired DMX, wireless DMX using CRMX from LumenRadio, and ArtNet. What’s In The Box: DMG SL1 Lamp Head Flat Dome Diffuser Panel Note: Power Supply and Driver accessories are required and sold separately. Lux @ 1 meter (3.3 ft.): 4100 @ 3200K / 4036 @ 5600K Lux @ 3 meter (10 ft.): 552 @ 3200K / 544 @ 5600K Input Voltage:Via A/C Power Supply (sold separately): 100-240 VAC Input Voltage:Via Battery Adapter (sold separately): 12-35 VDC Maximum Power: 200W LED Colors: Red*, Green, Blue, Lime*, Amber*, White (4000K) * Denotes phosphor-converted LEDs that are unique to Rosco. Light Modes: WHITE / GEL (with True Rosco Color Gel Matches) / COLOR – HSI & XY (With Rec 709 & Rec 2020 overlays) / EFFECTS / SOURCE MATCH Color Temperature Range: 1700K – 10,000K Flicker-Free: Up to 4,000 FPS Control Protocols:via CT Driver (sold separately) Via Bluetooth using the myMIX appRDM enabled DMX 512 via 5-pin XLRWireless via LumenRadio CRMX Timo FX transceiverArtNet via LAN (RJ45) and WiFi (2.4 & 5.8GHz) Dimensions: 44″ x 8″ x 1.4″ (111.8cm x 20.5cm x 3.7cm) Weight: 9.2 lbs (4.18 kg) Body Material: Aluminum Circuit Board Material: Aluminum Product Number 298222000401 DMG SL1
