he Stanko LA 660×3000 is a heavy-duty manual engine lathe built by the same reputable Taiwanese manufacturer that produced the well-known Modern 660×3000 model. This machine delivers the same proven reliability, rigidity, and cutting performance that many Canadian shops already trust. With a 26" swing over bed, 118" between centers, a 4.1" spindle bore, and a D1-11 camlock spindle, it is engineered for machining large shafts, flanges, rollers, and general heavy turning. An upgraded 15 HP main motor, rigid 15.75" wide bed, 12 spindle speeds (13–1200 rpm), and 36 feed combinations support precise roughing and finishing work. The removable gap allows oversized flange turning, while the large spindle bore makes this lathe ideal for long-shaft jobs in maintenance, oilfield, and job-shop environments. Each Stanko LA 660×3000 comes equipped with a 15" 3-jaw chuck, drive plate, steady rest with rollers, dead center, coolant system, and leveling screws. Optional upgrades include a 4-jaw chuck, DRO, and additional tooling, making this machine a reliable and cost-effective replacement for the classic Modern Tool 660×3000 lathe. Specifications:Swing over bed: 25.98”– Swing over carriage: 17.52”– Swing over gap: 35.12”– Width of gap in front of face plate: 10.63”– Distance between centers: 118”– Width of bed: 15.75”– Compound slide travel: 7.5”– Cross slide travel: 15.75”– Spindle bore: 4 1/16”– Chuck: 15" 3 Jaw, Bore-5"– Taper of spindle bore & center: MT#7 & MT #5– Spindle nose: D1-11– Number of spindle speeds: 12– Spindle speed: 13, 20, 30, 47, 70, 105, 150, 230, 340, 530, 800, 1200 rpm– Number of feeds: 36– Range of longitudinal feeds: 0.037~1.04mm/rev (P=6 mm, 12mm); 0.035~0.98mm/rev (4 TPI, 2TPI)– Range of cross feeds: ½ of longitudinal feeds – Lead screw diameter: 1.77”– Lead screw pitch: 4TPI, P=6mm– Range of inch pitches: 2~72 TPI / 44 kinds (1~42TPI/ 48 kinds)– Quill stroke: 7”– Quill diameter: 2.95”– Quill taper: MT #5– Main motor: 15 HP/ 3P– Voltage: 220V– Coolant pump motor: ⅛ HP– Machine height: 60”– Dimensions 184"x56"x47"– Weight: 6,930 lbs. Standard Accessories:– Multi-position length stop– 12” drive plate– Center sleeve MT # 7 x 5– Service kit– Dead center MT# 5– Coolant system– Leveling screws– Steady rest 1.57”~10” with roller jaws– 15 HP/4 P main motorOptional Accessories:20" 4 Jaw Chuck $2,295.00Large rollers style steady rest 16" $2,480.00Follow Rest $648.00Taper Attachment $3,990.00Rear Splash Guard $1,480.00DRO System $3,990.00LED Work Light $180.00
