Slate Digital ML-1A Modelling Microphone, (Used)
The Slate Digital ML-1A Modelling Microphone is a large-diaphragm condenser designed as the recording front end for Slate Digital's Virtual Microphone System, allowing recordings t o be shaped using a wide range of virtual microphone models after tracking. Compared with the original ML-1, the ML-1A introduces significantly improved technical performance, including just 8dBA self-noise, an 86dB signal-to-noise ratio and a three-position 0/-10/-20dB pad capable of handling sources up to 145dB SPL. This pre-owned example is presented in Excellent Condition and supplied with a protective hardcase. Importantly, the associated Slate Digital software has been de-registered from the previous owner, and a new software activation code is included in the box, allowing the new owner to register the microphone and associated software to their own Slate Digital/iLok account. At A Glance Detail Specification Brand Slate Digital Model ML-1A Type Large-Diaphragm Modelling Condenser Microphone Polar Pattern Cardioid Diaphragm 1" / 25.4mm Frequency Response 20Hz–20kHz Self Noise 8dBA Maximum SPL Up to 145dB Pad 0 / -10 / -20dB Connection XLR Power 48V Phantom Power Software Virtual Microphone System Software Status De-Registered from Previous Owner New Activation Code Included Condition Excellent Included Hardcase Main Appeal Record clean source audio and choose virtual microphone character afterwards Condition Overview Excellent Condition This Slate Digital ML-1A is presented in Excellent Condition. Under the Fair Deal Music grading system, Excellent Condition means the microphone shows very light signs of previous use while remaining particularly well presented and fully functional. Software Transfer Completed An especially important part of this package is that the associated software licence has already been prepared for transfer. Previous software registration has been removed A new activation / redemption code is included Code is supplied in the box New owner can register the ML-1A to their own Slate Digital account Compatible iLok account is required for software activation This avoids the buyer receiving a microphone whose software remains tied to a previous owner's account. What's Included? ✔ Slate Digital ML-1A Modelling Microphone✔ Hardcase✔ New Slate Digital Software Activation Code✔ Software De-Registered from Previous Owner Any additional accessories are included only where pictured or stated. Software Registration New Activation Code Included The original owner has had the Slate Digital software de-registered, and a replacement activation code is included with the microphone. The new owner can use this code together with the microphone's serial number to register the ML-1A to their own Slate Digital account. Once correctly registered, the appropriate VMS ML-1A licence is deposited into the user's linked iLok account. This is particularly important when buying a used modelling microphone because the physical microphone forms only one part of the complete ML-1A workflow. What Makes The Slate Digital ML-1A Special? The ML-1A is deliberately designed to capture a clean, neutral source signal. Rather than committing permanently to the colour of a particular vintage-style microphone during recording, the captured audio can subsequently be processed through Slate Digital's Virtual Microphone System. This allows the engineer to audition different microphone characters: While recording During editing During mixing After the performer has left Without re-recording the source That flexibility can be particularly valuable when working quickly or recording artists who perform better without repeated microphone comparisons. Virtual Microphone System The Virtual Microphone System uses the ML-1A as its calibrated physical source microphone. Within the software, the recorded signal can then be processed through virtual microphone models inspired by a broad range of studio microphone designs. The system also provides creative controls including: Microphone model selection Mic model morphing Proximity adjustment Width control Rumble filtering Virtual preamp processing This makes the ML-1A considerably more than a conventional large-diaphragm condenser. Mic Model Morphing One of the newer VMS functions allows two microphone models to be blended together. Rather than being restricted to selecting one virtual microphone, the user can combine characteristics from two models to create intermediate or hybrid sounds. This can be particularly useful for finding a vocal tone that sits naturally within a dense mix. Proximity Control The VMS proximity control allows the perceived proximity effect to be adjusted after recording. This can help: Add body to a thin vocal Reduce excessive low-end buildup Refine spoken-word recordings Balance close-miked sources It provides a level of post-recording control that is impossible with a conventional fixed microphone recording. Width Control The VMS software can also introduce adjustable stereo width from the ML-1A's mono source recording. This can be useful for: Backing vocals Layered arrangements Sound design Cinematic textures Creative vocal production Large-Diaphragm Condenser Design The ML-1A uses a 1" / 25.4mm condenser diaphragm. Large-diaphragm condensers are commonly chosen for: Lead vocals Voiceover Acoustic guitar Piano Guitar cabinets Room microphones Percussion General studio recording The microphone's clean source response is specifically designed to provide an appropriate foundation for subsequent modelling. Low Self-Noise The ML-1A has a rated self-noise figure of only: 8dBA This is a substantial improvement over the original ML-1's 17dBA specification. Low self-noise is particularly valuable when recording: Quiet singers Spoken word Delicate acoustic instruments Distant sources Ambient material Sources requiring substantial preamp gain 86dB Signal-To-Noise Ratio The ML-1A offers an 86dB A-weighted signal-to-noise ratio, helping capture clean material with minimal unwanted noise contribution from the microphone itself. Three-Position Pad The ML-1A features a hardware pad with three settings: 0dB -10dB -20dB Using the -20dB setting allows the microphone to handle sound pressure levels of up to approximately 145dB SPL. This significantly expands its usefulness with loud sources. Suitable For Loud Sources With the pad engaged, the ML-1A can be used on sources including: Guitar amplifiers Loud vocalists Brass Percussion Drum room positions Powerful acoustic instruments This makes it substantially more versatile than a microphone designed purely around vocal recording. Cardioid Polar Pattern The ML-1A uses a fixed cardioid polar pattern. Cardioid microphones primarily capture sound arriving from the front while reducing pickup from the rear. This makes the microphone particularly useful for: Vocal isolation Home studios Reducing room reflections Instrument recording Controlling bleed between performers Who Is It For? Vocal producers – The ability to audition different virtual microphone characters after recording is exceptionally useful for vocals. Home studio owners – One modelling microphone can provide access to a broad tonal palette without requiring a large physical microphone collection. Professional engineers – Provides a repeatable source microphone designed specifically for the Slate modelling environment. Songwriters and producers – Reduces the need to spend significant session time comparing microphones before recording. Voiceover creators – Low self-noise and modelling flexibility provide a wide range of tonal options. Content creators – Suitable for spoken word, narration and professional vocal production. Studio musicians – The pad extends its usefulness beyond vocals to amplifiers, percussion and louder instruments. Suitable Recording Applications Particularly useful for: Lead vocals Backing vocals Voiceover Podcast recording Acoustic guitar Piano Guitar cabinets Percussion Room microphones Brass Strings Singer-songwriter sessions Studio production Content creation ML-1A vs Original ML-1 The ML-1A updates the original Slate Digital ML-1 in several significant areas. Lower Noise ML-1A: 8dBA self-noise Original ML-1: 17dBA self-noise Improved Signal-To-Noise ML-1A: 86dB A-weighted Original ML-1: 77dB A-weighted Hardware Pad The ML-1A adds a: 0 / -10 / -20dB pad The original ML-1 did not feature this hardware pad. Maximum SPL With the -20dB pad engaged, the ML-1A can handle sources up to approximately: 145dB SPL Updated Software Workflow The ML-1A is designed around Slate's newer Virtual Microphone System plugin, adding controls such as: Model morphing Proximity adjustment Width Updated microphone browsing Additional modelling functionality Technical Specifications Specification Details Product Type Modelling Condenser Microphone Brand Slate Digital Model ML-1A Microphone Type Condenser Diaphragm 1" / 25.4mm Polar Pattern Cardioid Frequency Range 20Hz–20kHz Output Impedance 50 Ohms Sensitivity -32.5dB Signal-To-Noise Ratio 86dB A-Weighted Self Noise 8dB A-Weighted Maximum SPL Up To 145dB Pad 0 / -10 / -20dB Connector 3-Pin XLR Power Requirement 48V Phantom Power Software Platform Slate Digital Virtual Microphone System Plugin Formats AAX, AU, VST2, VST3 Approx. Length 7.8" Approx. Diameter 1.96" Approx. Weight 0.99 lb Software Status De-Registered Replacement Activation Code Included Included Hardcase Condition Pre-Owned, Excellent Power Requirements The Slate Digital ML-1A requires 48V phantom power from a compatible: Audio interface Microphone preamp Mixing console Channel strip No external dedicated power supply is required. A suitable XLR microphone cable and phantom-powered input are required for operation. Audio Interface Requirements The ML-1A itself outputs a conventional analogue microphone-level XLR signal. It therefore requires a suitable microphone preamp or audio interface. For best modelling results, the recording chain should generally be kept clean and neutral before the VMS software is applied. Software Requirements The ML-1A uses Slate Digital's Virtual Microphone System software. A compatible computer, DAW and Slate Digital/iLok account are required for the software workflow. Current supported plugin formats include: AAX AU VST2 VST3 Software compatibility should always be checked against the buyer's current operating system and DAW before purchase. Software Licence Transfer Note The software associated with this microphone has been de-registered from its previous owner. A new activation code is included in the box for the purchaser. The buyer will need to: Create or use their own Slate Digital account Enter the supplied activation code Register the ML-1A serial number Link an iLok account Download the relevant Slate Digital software This provides the buyer with a clean registration route rather than relying on access to the previous owner's account. Hardcase A hardcase is included with this microphone. This provides useful protection during: Transport Studio storage Mobile recording Session work Fair Deal Music Verdict ★★★★★ 5/5 The Slate Digital ML-1A is an extremely flexible studio microphone for producers who value the ability to make tonal decisions after the recording has already taken place. Its 1" condenser capsule, exceptionally low 8dBA self-noise and 0/-10/-20dB hardware pad make it suitable for considerably more than vocals, while the VMS software transforms the clean source recording into a highly adaptable production tool. This example is particularly attractive as a pre-owned purchase because the software has already been de-registered from its previous owner and a brand-new activation code is included in the box. That means the new owner can register the microphone and software under their own account rather than receiving hardware whose associated licence remains tied elsewhere. Presented in Excellent Condition and supplied with a hardcase, this is a particularly complete used ML-1A package for studio recording, vocal production, voiceover and content creation. Why Buy Pre-Owned From Fair Deal Music? Software-enabled studio equipment requires more careful description than conventional analogue hardware. On this ML-1A, the software transfer status has been clearly established: Previous registration removed New activation code supplied Hardcase included Excellent physical condition This gives the new owner a clear route to registering the microphone and associated VMS software. Why Buy From Fair Deal Music? When you buy from Fair Deal Music, you're choosing one of the UK's most established, independent family run music retailers since 1987. Fair Deal Music is Birmingham's largest independent music store, combining a major showroom with nationwide ecommerce and decades of experience selling new and pre-owned musical equipment. When you buy from us, you benefit from: Family-run independent retailer established in 1987 Birmingham's largest independent music store 6,000+ Trustpilot reviews Expert musician-led advice Pre-owned studio equipment individually assessed Software-transfer status clearly disclosed Clear condition grading Secure ordering Fast UK delivery Large Birmingham showroom Friendly support before and after purchase Trade In. Trade Up. Save More. Have recording equipment you no longer use? Fair Deal Music buys and part-exchanges studio equipment, microphones, guitars, basses, amplifiers, effects, keyboards and other musical equipment. Contact our team for a no-obligation valuation and find out what your existing gear could be worth towards your next purchase. Frequently Asked Questions What condition is this Slate Digital ML-1A in? It is presented in Excellent Condition, showing only very light signs of previous use. Is this the newer ML-1A or the original ML-1? This is the newer ML-1A. What type of microphone is it? It is a large-diaphragm condenser modelling microphone. What polar pattern does it use? It uses a fixed cardioid pattern. What size is the diaphragm? It has a 1" / 25.4mm diaphragm. What is the frequency response? The rated frequency range is 20Hz–20kHz. How much self-noise does it have? The ML-1A is rated at just 8dBA self-noise. Does it have a pad? Yes. It has a three-position 0dB, -10dB and -20dB pad. What is the maximum SPL? It can handle up to approximately 145dB SPL with the -20dB pad engaged. Does it require phantom power? Yes. The ML-1A requires 48V phantom power. Does it require a special audio interface? No proprietary interface is required. It can connect to a suitable conventional microphone preamp or audio interface via XLR. What software does it use? It is designed to work with Slate Digital's Virtual Microphone System. Is the software included with this used microphone? Yes. The previous software registration has been removed and a new activation code is included in the box. Is the software still registered to the previous owner? No. It has been de-registered. Can the new owner register it to their own account? Yes. The supplied new code is intended to allow the purchaser to register the microphone/software under their own Slate Digital account. Do I need an iLok account? Yes. Slate Digital's ML-1A licensing system uses iLok. Can microphone models be changed after recording? Yes. This is one of the key advantages of the system. The clean ML-1A recording can be processed through different compatible microphone models later. Can two virtual microphones be blended? Yes. The current VMS workflow includes microphone model morphing/blending functionality. Is it only suitable for vocals? No. It can be used for acoustic guitar, amps, piano, percussion, voiceover and many other sources. Is it suitable for loud guitar cabinets? Yes. With the hardware pad engaged, the ML-1A can handle very high SPL levels. Does it come with a case? Yes. A hardcase is included. Can I part-exchange studio equipment against it? Yes. Fair Deal Music considers trade-ins and part exchanges across a wide range of studio equipment and musical instruments.
