Slice Engineering Mosquito Conduct Hotend

Phaser FPV Verified independent store

→

Are you looking to buy a Mosquito Conduct in Australia? So this hotend is a little bonkers. It's tiny, lightweight, and doesn't use a fan! We eliminated the fan by conducting heat to a small copper heat sink at the top that we call a "Base". The conduction heat break of the Mosquito® Conduct doesn't have cooling fins and is designed instead to only use conductive heat transfer to prevent heat creep. Even with no fins and its small size, the Mosquito Conduct can still print up to 500°C and can have nozzles swapped with one hand! The Mosquito Conduct needs to be mounted to a metallic part or carriage that can help conduct heat away from the Base. That mating part must have 88 cm2 of surface area exposed to ambient air for radiative and convective heat transfer to facilitate cooling, or use liquid cooling. The Base Conduct also incorporates quick release geometry to allow for rapid swapping of the entire hotend. If you hate the noise a hotend fan generates, but want a super-compact, high temperature hotend, this could be the hotend for you! Rated for printing temperatures up to 500°C covering all printable thermoplastics Eliminates heat creep, reduces jamming, and improves printing resolution through Bimetallic Heat Break™ technology Conducts 85% less heat than a standard threaded heat break Increased structural rigidity allows for a One-handed Nozzle Change™ Modular/adaptable to almost any FFF/FDM printer and ideal for multi-extrusion systems Uses RepRap style nozzles (M6 x 1.0 threads with a 7 mm thread length and 12.5 mm overall length) Low mass on the carriage for maximum X-Y acceleration Browse more Browse all Slice Engineering Browse the Mosquito Browse all Hotends Show more